Operating Instructions
RQT8708
8
Basic play
Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the
unit is still consuming a small amount of power.
≥
To p l ay
[MP3], [JPEG]
,
[MPEG4]
or
[DivX]
contents on DVD-RAM that contain both
[DVD-VR]
and another format (e.g.
[JPEG]),
select “Play as Data Disc” (
➜
page 17, Other Menu).
≥ Discs continue to rotate while menus are displayed. Press [∫] when you finish to
preserve the unit’s motor and your television screen.
≥ Total title number may not be displayed properly on iR/iRW.
DIRECT
TOP MENU
NAVIGATOR
PLAY LIST
MENU
CM SKIP
PauseStop
1Power ON.
2Open the disc tray.
3Load the disc.
4Start play.
Remote control sensor
≥
Load double-sided discs so the label for the side you want
to play is facing up.
≥
DVD-RAM: Remove discs from their cartridges before use.
Skip
≥ [DVD-VR]
Can also skip to the markers.
Stop
The position is memorized when “!” flashes on the display.
≥ Press [1] (PLAY) to resume. (
Resume play
)
≥ Press [∫] to clear the position.
≥ Even after the unit is turned off, the position is memorized
(
Normal playback only
).
Search (during play)
Slow-motion (during pause)
≥ Up to 5 steps
≥ Press [1] (PLAY) to restart play.
≥ [VCD] Slow-motion: forward direction only
≥ [MPEG4] [DivX] Slow-motion: Does not work.
Pause
≥ Press [1] (PLAY) to restart play.
Repeat play
≥ Select “Repeat” (➜ page 11, Repeat play) or “A-B Repeat”
(➜ page 16, Play Menu).
If you are experiencing problems, refer to troubleshooting guide (➜ page 20, 21).
Basic play
RQT8708-Y(En)_0214.fm Page 8 Wednesday, February 15, 2006 4:50 PM