Operating instructions

87
Multi-Station Transmission (Broadcasting)
You can store the document(s) into memory and then send to multiple stations (up to 270 addresses) via LAN.
(see Note 1) (see Note 2) (see Note 3)
1
Set document(s) face down.
You can temporarily change the transmission settings.
2
Enter email addresses by any combination of the following
methods:
• One-Touch Dialing
• Abbreviated Dialing
• Directory Search Dialing, press after each
email address is entered.
• Manual Number Dialing, press after each
station is entered (up to 70 addresses).
Ex:
If you want to confirm the number of stations you have
entered, press .
3
The document(s) is stored into memory with a file number.
Then starts sending the email message.
1. If your machine sounds an alarm (pi-pi-pi) at Step 2, this indicates that the Dialer is Full (more than 70 full email
addresses are entered or 70 transmission reservations including G3 communication have been already reserved).
2. If the transmission can not be completed for any reason, the email may be returned undelivered, otherwise no reply
will be printed.
3. The unit will accept a combination of email addresses and PSTN dialing numbers.
ENTER STATION(S)
THEN PRESS START 00%
SET
SET
01
ABBR
1 0 0
SET
<01>(Station name)
[e-mail]
❚
[100](Station name)
[e-mail]
❚
2 STN(S) ARE SET
ADD MORE OR START
START
* STORE * NO.001
PAGES=001 01%
* STORE * COMPLETED
TOTAL PAGE=005 25%
ON LINE * MEM.XMT *
ID:[e-mail]
Note:
Sending Documents via LAN
4