Service manual

72
17.3 Remote Control Button
17.3.1 SET Button
 To check remote control transmission code and store the transmission code to EEPROM
o Press “Set” button continuously for 10 seconds by using pointer
o Press “Timer Set” button unit a “beep” sound is heard as confirmation of transmission code change.
17.3.2 RESET (RC)
 To clear and restore the remote control setting to factory default.
o Press once to clear the memory
17.3.3 RESET (AC)
 To restore the unit’s setting to factory default.
o Press once to restore the unit’s setting
17.3.4 TIMER ▲
 To change indoor unit indicator’s LED intensity:
o Press continuously for 5 seconds.
17.3.5 TIMER ▼
 To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
o Press continuously for 10 seconds.
17.3.6 CLOCK Button
 To change the remote control time format:
o Press for more than 5 seconds