Owner's Manual

6
∫ General
∫ Bluetooth
®
section
∫ Headphone section
*1 It may be shorter depending on the operating conditions.
*2 The time required to charge the battery from empty to full.
• Specifications are subject to change without notice.
This unit may receive radio interference caused by
mobile telephones during use. If such interference
occurs, please increase separation between this unit and
the mobile telephone.
Use only the supplied USB charging cord when
connecting to a computer.
The symbols on this product (including the accessories)
represent the following:
: DC
Í : Standby
I : ON
1 Remove the left ear pad to view certification
information.
2 Certification information (a) is indicated on the
speaker plate portion, which becomes visible when the
left ear pad (L side) is removed.
3 To attach the ear pad, insert the clips b into the
matching parts c on the ear pad. (There are 6 clips)
If you pull the ear pad too much, the ear pad can tear.
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Panasonic Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
LDAC and LDAC logo are trademarks of Sony Corporation.
QR Code is a registered trademark of DENSO WAVE
INCORPORATED.
Other system names and product names appearing in this
document are in general the registered trademarks or
trademarks of the respective developer companies.
Note that the
TM
mark and
®
mark do not appear in this
document.
1 2
3


This product incorporates the open source software other
than the software licensed under the GPL V2.0 and/or
LGPL V2.1. The software categorized as above are
distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY, without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. Please refer to the detailed terms and
conditions thereof shown at the following web page.
https://panasonic.jp/support/global/cs/audio/download/index.html
This unit complies with the “High Resolution Audio”
standard of the Japan Audio Association.
• To enjoy wireless high-resolution quality (sound quality
certified by the high-resolution wireless logo), use a
playback device with the high-resolution wireless logo and
set the Bluetooth
®
sound quality setting to sound quality
priority mode / LDAC 990 kbps.
• In modes other than the above (connection priority mode,
etc.), playback may not be possible with high resolution
quality.
Specifications
Power supply
DC 5 V, 1200 mA
Built-in battery
3.7 V, Lithium polymer
Operating time
*1
Approx. 50 hours
(Noise cancelling: ON, AAC)
Approx. 50 hours
(Noise cancelling: ON, SBC)
Approx. 40 hours
(Noise cancelling: ON,
LDAC)
Charging time
*2
(25 oC (77 oF))
Approx. 3.0 hours
Charging temperature range
10 oC to 35 oC
(50 oF to 95 oF)
Operating temperature range
0 oC to 40 oC
(32 oF to 104 oF)
Operating humidity range
35 %RH to 80 %RH
(no condensation)
Mass (Weight)
Approx. 298 g (10.5 oz)
(without cord)
Frequency band
2402 MHz to 2480 MHz
Supported profiles
A2DP, AVRCP, HSP, HFP
Supported codec
SBC, AAC, LDAC
Impedance
34 Ω
Charging terminal
USB Type-C Shape
EAH-A800_Basic_E.book 6 ページ ２０２１年１０月１５日 金曜日 午後３時２２分