Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ M
– EE123 –
φ10<
φd±0.05
Sleeve
14 min.
3min.
L
φ6.3<
L<16:L±1.0
L>20:L±2.0
Pressure relief
+
φ4toφ8
φD+0.5
F±0.5
φD+0.5
Features
Endurance : 85 °C 2000 h
Smaller than series SU
RoHS directive compliant
Radial Lead Type
Series:
M
Type:
A
Specifi cations
Category Temp. Range 40 °C to + 85 °C –25 °C to +85 °C
Rated W.V. Range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC
Nominal Cap. Range 0.1 µ F to 22000 µF 1 µF to 470 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent
I
<
0.01 CV or 3 (µA) After 2 minutes
(Whichever is greater)
I
<
0.06 CV +10 (µA) After 2 minutes
tan
δ
Please see the attached standard products list
Endurance
After applying rated working voltage for 2000 hours at +85°C±2 °C, when the capacitors are
restored to 20 °C, capacitors shall meet the following limits.
Capacitance change ±20 % of initial measured value
tan
δ
<
150 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +85 °2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Di men sions in mm (not to scale)
(mm)
Body Dia.
φ
D5 6.3 8 1012.516 18
Lead Dia.
φ
d0.50.50.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
[mm]
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
Frequency correction factor for ripple current
Jun. 201101

Summary of content (5 pages)