Datasheet

Aluminum Electrolytic Capacitors/ M
EE106
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.
Mar.2006
MA
Series:
Type :
-40 to + 85°C
6.3 to 100 V .DC
0.1 to 22000 µ F
I 0.06 CV + 10(µ A) after 2 minutes
Body Dia. φD
Lead Dia. φd
Lead space P
0.5 0.5 0.6 0.6 0.6 0.8 0.8
2 2.5 3.5 5 5 7.5 7.5
5 6.3 8 10 12.5 16 18
Japan
Malaysia
China
( 6.3mmdia)
L
L 16:L+1.0 max
φ
0.05
14 min 3 min
φD+0.5 max
φ10<
P± 0.5
φD+0.5 max
φ8>
P± 0.5
L 20:L+2.0 max
Radial Lead Type
n Features
Endurance:85°C 2000 h
Smaller than series SU
RoHS directive compliant
n Specifications
-25 to + 85°C
160 to 450 V .DC
1 to 470 µ F
Category temp.range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
I 0.01 CV or 3(µ A) after 2 minutes
(Whichever is greater)
Endurance
Characteristics
at Low Temperature
Shelf Life
n Dimensions in mm (not to scale)
Z(- 40 °C)/
Z(+20 °C)
W.V. (V)
Z(- 25 °C)/
Z(+20 °C)
6.3 10 16 25 35 50 63 100 160 200 250 350 400 450
5 4 3 2 2 2 2 2 2 2 3 5 6 6
12 10 8 5 4 3 3 3 - - - - - -
1. Add 0.5 per 1000 µF for products of 1000 µF or more at -25 °C
2. Add 1.0 per 1000 µF for products of 1000 µF or more at -40 °C
After applying rated working voltage for 2000 hours at +85°C and then being stabilized at
+20°C, capacitor shall meet the following limits.
Capacitance change
tan δ
DC leakage current
± 20% of initial measured value
150 % of initial specified value
initial specified value
After storage for 1000 hours at +85±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
(Impedance ratio at 120 Hz)
Sleeve
Vent
±20 % (120Hz/+20°C)
Please see the attached standard products list
Standard
<
=
<
=
<
=
<
=
<
=
<
=
<
=
Country of Origin
(mm)

Summary of content (5 pages)