Manualshelf

Datasheet

ManualsBrandsPANASONIC ManualsCapacitorsThin film capacitor Radial lead 0.047 µF 1600 Vdc 5 % 25 mm (L x W) 28 mm x 15 mm 1 pc(s)
123456
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Plastic Film Capacitors
1 2 3 4 5 6 7 8 9 11
E C W H
12
Product code Dielectric &
construction
SuffixRated voltage Capacitance SuffixCap. Tol.
10
V
Code
Blank
B
C
Lead Form
Straight
Crimped lead
Cut lead
H ±3 %
J ±5 %
10 1000 V.DC
12 1250 V.DC
16 1600 V.DC
20 2000 V.DC
1 2 3 4 5 6 7 8 9 11
E C W H
12
Product code Dielectric &
construction
Cap. Tol.Rated voltage Capacitance SuffixSuffix
10
VR
●
Low-loss and inherent tempereature rise
●
Excellent electrical characteristics
●
Flame-retardant epoxy resin coating
●
RoHS directive compliant
●
High frequency high voltage circuit
(TV horizontal resonance, inverter lighting circuit)
●
Odd size taping
Non-inductive construction using metallized polypropylene fi lm
with fl ame retardant epoxy resin coating.
Features
Metallized Polypropylene
Film Capacitor
Type : ECWH(V)
Category temp. range
(Including temperature-rise on unit surface)
– 40 °C to +105 °C
Rated voltage
1000 V.DC, 1250 V.DC (1000 Vp-p)
1600 V.DC (1200 Vp-p), 2000 V.DC (1500 Vp-p)
(Derating of rated voltage by 1.25 %/°C at more than 85 °C)
Capacitance range
1000 V.DC 0.0075 F to 0.10 F
1250 V.DC 0.0036 F to 0.10 F
1600 V.DC 0.0013 F to 0.056 F
2000 V.DC 0.001 F to 0.015 F
Capacitance tolerance ±3 %(H), ±5 %(J)
Dissipation factor (tan d)
tan d < 0.1 % (20 °C, 1 kHz)
tan d < 0.2 % (20 °C, 10 kHz)
Withstand voltage
Between terminals : Rated volt. (V.DC)×150 %, 60 s
Between terminals to enclosure : 1500 V.AC 60 s
Insulation resistance (IR) IR > 30000 MΩ (20 °C, 500 V.DC, 60 s)
✽
In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Recommended applications
Explanation of part number
Speci cations
Feb. 201601

Summary of content (6 pages)