Datasheet

Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Plastic Film Capacitors
Stacked Metallized PEN Film Chip Capacitor
Type: ECWU(C)
Stacked metallized PEN film as dielectric with simple
mold-less construction
123456789101112
E C W U
Product code Dielectric
&
construction
Rated voltage Nominal capacitance
C
Cap. Tol. Suffix Suffix
■Features
•
Small in size
•
For reflow soldering
•
RoHS directive compliant
■Recommended Applications
•
General purpose (Coupling, By-pass)
■Explanation of Part Numbers
■Specifications
J
±
5
%
K
±
10 %
1C
1H
1
2
16 VDC
50 VDC
100 VDC
250 VDC
9 12 mm
V 16 mm
Tape width
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please
refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
❈ Please consult us for capacitance range between 0.15 µF and 1.0 µF for 250 VDC type.
Capacitance tolerance
Capacitance range
Withstand voltage
Category temp.range
(Including temperature-rise on unit surface)
Between terminals: Rated volt . (VDC)✕150 % 60 s
Soldering conditions
100 VDC, 250 VDC : -55 ˚C to +125 ˚C
0.12 µF to 0.47 µF
(
E12
)
0.056 µF to 0.22 µF
(
E12
)
0.012 µF to 1.0 µF
(
E12
)
0.0010 µF to 0.12 µF
(
E12
)
Insulation resistance (IR)
Dissipation factor (tan )
Reflow soldering : 240 ˚C max. and 60 s max. at more than 220 ˚C (Temp. at cap. surface)
(Please consult us for Reflow 250 ˚C max. product.)
tan
<
=
1.0 %(20 ˚C, 1 kHz)
C
>
0.33 µF
C
<
=
0.33 µF
16 VDC : IR
>
=
3000 MΩ · (20
˚C
,10 VDC, 60 s)
50 VDC : IR
>
=
3000 MΩ · (20
˚C
,50 VDC, 60 s)
100 VDC, 250 VDC : IR
>
=
3000 MΩ · (20
˚C
,100 VDC, 60 s)
16 VDC : IR
>
=
1000 MΩ · µF (20
˚C
,10 VDC, 60 s )
100 VDC : IR
>
=
1000 MΩ · µ F (20 ˚C,100 VDC, 60 s)
16 VDC, 50 VDC : -55 ˚C to +105 ˚C
16 VDC, 50 VDC
100 VDC
250 VDC
16 VDC
50 VDC
100 VDC
250 VDC
±5 %(J)
±5 %(J), ±10 %(K) (C
>
=
0.18 µF : ±10 %(K)only)
±5 %(J), ±10 %(K)
Rated voltage
16 VDC, 50 VDC, 100 VDC, 250 VDC
(100 VDC, 250 VDC : Derating of rated voltage by 1.25 %/˚C more than 85 ˚C)