Datasheet

ManualsBrandsPanasonic ManualsAluminium Electrolytic CapacitorsRadial Electrolytic Capacitor, 15uF, 35VDC, 20%

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors (Radial Lead Type)

0D±0.5

F±0.5

Sleeve

14 min.

3 min.

L±1.0

–

fd±0.05

●

Endurance : 105 °C 1000 h

●

RoHS compliant

Features

Radial Lead Type

Series : GA Type : A

Speci cations

Frequency correction factor for ripple current

Category temperature range

–55 °C to +105 °C

Rated voltage range 10 V.DC to 50 V.DC

Capacitance range 1.5 µF to 220 µF

Capacitance tolerance ±20 % (120 Hz/+20 °C)

Leakage current I

0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)

Dissipation factor (tan d) Please see the attached characteristics list

Endurance

After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum

of DC and ripple peak voltage shall not exceed the rated working voltage), for 1000 hours, when

the capacitors are restored to 20 °C, the capacitors shall meet the limits speciﬁ ed below.

Capacitance change Within ±20 % of the initial value

tan d

< 200 % of the initial limit

DC leakage current Within the initial limit

Shelf life

After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance. (With voltage treatment)

D456.38

d 0.45 0.45 0.45 0.45

F 1.5 2.0 2.5 2.5

(Unit : mm)

Dimensions

Frequency (Hz) 60 120 1 k 10 k 100 k to

Correction factor 0.85 1.00 1.30 1.40 1.55

Mar. 201604

Summary of content (2 pages)

PAGE 1
Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : GA Type : A Features ● Endurance ● RoHS : 105 °C 1000 h compliant Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) –55 °C to +105 °C 10 V.DC to 50 V.DC 1.5 µF to 220 µF ±20 % (120 Hz/+20 °C) I < 0.
PAGE 2
Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 1000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 16 25 22 4 7 5 7 50 0.22 1000 0.45 2.0 5.0 2.5 EEAGA1A330( ) Min. Packaging Q'ty Straight Taping leads (pcs) (pcs) 200 2000 200 2000 47 6.3 7 65 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A470( ) 200 2000 68 6.3 7 75 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A680( ) 200 2000 100 6.3 7 110 0.22 1000 0.45 2.5 5.0 2.