Datasheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Electric Double Layer Capacitors (Gold Capacitor)
Sleeve
9.5 max. 6±1
5.0±0.30.5±0.1
fD
2.5±0.5
3.5±0.5
6±1
1.2±0.1
0.8±0.1
+ –
+
–
5.0
01.1±0.05
(Recommended)
●
Endurance : +85 °C 2000 h
●
Can be discharged mA current
●
RoHS compliant
●
Backup of data/RTC of base station, electronic meter, and industrial equipment
●
For assist of rapid load change
Stacked Coin Type
Series : RF
(Unit : mm)
Features
Recommended applications
Speci cations
Dimensions in mm(not to scale)
Characteristics list
Do not use refl ow soldering. (IR, Atmospherheating methods, etc.) Please refer to the page of “Application guidelines”.
The recommended discharge current is a reference value. Please design your equipment(circuit) in consideration of IR dorop.
Cap (F)
0
D
(mm)
0.1 13.5 max
0.68, 1.0 21.5 max
Maximum
operating
voltage
(V.DC)
Capacitance
(F)
Capacitance
tolerance
(F)
Internal resistance
(Initial specifi ed value)
(Ω) at 1 kHz
Recommended
discharge current
(mA)
Parts number
Mass
(Reference value)
(g)
Min.
packaging
q'ty
(pcs)
5.5
0.1 0.080 to 0.180
<
75 3 or less EECRF0H104 3.3 200
0.68 0.544 to 1.224
<
20 20 or less EECRF0H684 10.0 100
1.0 0.8 to 1.8
<
20 20 or less EECRF0H105 10.0 100
Category temp. range –25 °C to +85 °C
Maximum operating voltage 5.5 V.DC
Nominal capacitance 0.1 F 0.68 F, 1.0 F
Characteristics at
low temperature
Capacitance change ±30 % of initial measured value at +20 °C (at –25 °C)
Internal resistance
<
5 times of initial measured value at +20 °C (at –25 °C)
Endurance
After 2000 hours application of maximum operating voltage at +85 °C
Capacitance change ±30 % of initial measured value at 20 °C
Internal resistance
150 Ω or less (0.1 F)
40 Ω or less (0.68 F, 1.0 F)
Shelf life
After 2000 hours storage at +85 °C without load (voltage)
Capacitance change Capacitance change shall meet the specifi ed limits for Endurance
Internal resistance Internal resistance shall meet the specifi ed limits for Endurance
Jan. 201602