Datasheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
A±0.2
W
( ) Reference size
L
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure Relief (010 and larger)
22
FKj
Capacitance (µF)
Rated voltage code
Series identification
Lot number
Negative polarity
marking (–)
Mark for Lead-Free
products
(Black dot)
Frequency correction factor for ripple current
●
Endurance : 105 °C 2000 h
●
Low impedance (40 % to 60 % less than FC series)
Miniaturized (30 % to 50 % less than FC series)
●
Vibration-proof product is available upon request. (08 mm and larger)
●
RoHS compliant
Features
Speci cations
DimensionsMarking
(Unit : mm)
Surface Mount Type
Series : FK Type : V
High temperature
Lead-Free re ow (suffix : A✽)
Category temperature range –55 °C to +105 °C
Rated voltage range 6.3 V.DC to 35 V.DC
Capacitance range 4.7 µF to 1500 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Dissipation factor (tan d) Please see the attached characteristics list
Characteristics
at low temperature
V.DC 6.3 10 16 25 35
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 22222
Z(–40 °C)/Z(+20 °C) 33333
Z(–55 °C)/Z(+20 °C) 44433
Endurance
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change Within ±30 % of the initial value
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Resistance to
soldering heat
After refl ow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 AEC-Q200 compliant
Example : 6.3 V.DC 22 µF
Marking color : BLACK
Size
code
0D
L
A, B H IWPK
B 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35
- 0.20
C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35
- 0.20
D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35
- 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
+ 0.15
+ 0.15
+ 0.15
+ 0.15
+ 0.15
Frequency (Hz)
Capacitance (µF)
120 1 k 10 k 100 k to
4.7 to 470 0.65 0.85 0.95 1.00
680 to 1500
0.70 0.90 0.95 1.00
R. Voltage
(V.DC)
6.3 10 16 25 35
Code j ACEV
Mar. 201604