Datasheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
22
FPj
Capacitance (µF)
Series identification
Lot number
Negative polarity
marking (–)
Rated voltage code
Mark for Lead-Free
products
(Black dot)
A±0.2
W
( ) Reference size
L
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure Relief (010 and larger)
Frequency correction factor for ripple current
●
Low ESR (30 % to 50 % less than FK series)
●
Endurance : 105 °C 2000 h
●
Vibration-proof product is available upon request. (08 mm and larger)
●
RoHS compliant
Features
Speci cations
DimensionsMarking
Surface Mount Type
Series : FP Type : V
High temperature
Lead-Free re ow (suffix : A✽)
Example : 6.3 V.DC 22 µF
Marking color : BLACK
Category temperature range –55 °C to +105 °C
Rated voltage range 6.3 V.DC to 50 V.DC
Capacitance range 10 µF to 1800 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage cur rent I
<
0.01 CV or 3 (A) After 2 minutes (whichever is greater)
Dissipation factor (tan d) Please see the attached characteristics list
Characteristics
at low temperature
V.DC 6.3 10 16 25 35 50
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 222222
Z(–40°C)/Z(+20 °C) 333333
Z(–55°C)/Z(+20 °C) 444333
Endurance
After applying rated working voltage at +105 °C ±2 °C for 2000 hours the capacitors shall meet
the limits specifi ed below. Post-test requirement at +20 °C
Capacitance change Within ±30 % of the initial value
tan
d
< 200 % of the initial limit
DC leakege current Within the initial limit
Shelf life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Resistance to
soldering heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan
d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 AEC-Q200 compliant
Size
code
0D
L A, B H I W P K
B 4.0 5.8±0.30 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35
- 0.20
C 5.0 5.8±0.30 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35
- 0.20
D 6.3 5.8±0.30 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
D8 6.3 7.7±0.30 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
E 8.0 6.2±0.30 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35
- 0.20
F 8.0 10.2±0.30 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.30 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
+ 0.15
+ 0.15
+ 0.15
+ 0.15
+ 0.15
Frequency (Hz)
Capacitance (µF)
120 1 k 10 k 100 k to
10 to 470 0.65 0.85 0.95 1.00
560 to 1800 0.75 0.90 0.95 1.00
(Unit : mm)
R. Voltage
(V.DC)
6.3 10 16 25 35 50
Code jACEVH
Mar. 201602