Datasheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
A±0.2
W
( ) Reference size
L
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure Relief (010 and larger)
100
TGA
Capacitance (µF)
Rated Voltage code
Series identification
Mark for Lead-Free
products
(Black dot)
Lot number
Negative polarity
marking (–)
1000
TGA
Capacitance (µF)
Rated Voltage code
Series identification
Lot number
Negative polarity
marking (–)
●
Endurance : 125 °C 1000 h to 2000 h
●
Miniaturization (40 % less than TA Series)
●
Low ESR (Low temp)
●
Vibration-proof product is available upon request. (08 mm and larger)
●
RoHS compliant (Parts No 08 to 010 : EEE✽, 012.5 to 018 : EEV✽)
Features
Speci cations
Surface Mount Type
Series : TG Type : V
Category temperature range –40 °C to +125 °C
Rated voltage range 10 V.DC to 100 V.DC
Capacitance range 10 µF to 4700 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage cur rent I < 0.01 CV After 2 minutes
Dissipation factor (tan d) Please see the attached characteristics list
Characteristics
at low temperature
V.DC 10 16 25 35 50 63 80 100
(Impedance ratio at 120 Hz) Z(–25 °C)/Z(+20 °C) 32222222
Z(–40 °C)/Z(+20 °C) 64433333
Endurance
After applying rated working voltage for 1000 hours (08×6.2), 2000 hours (08×10.2 <) at +125 °C±2 °C
and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±30 % of the initial value (code U : ±35 %)
tan d
< 300 % of the initial limit (code U : ±350 %)
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Resistance to
soldering heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 AEC-Q200 compliant
Example : 10 V.DC 100 µF, 10 V.DC 1000 µF
Marking color : BLACK
Lead-Free products (< 010)
Lead-Free products (> 012.5)
Size
code
0D
L A, B H I W P K
E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35
- 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.30
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.30
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30
+ 0.15
Frequency (Hz) 120 1 k 10 k 100 k to
Correction factor 0.65 0.85 0.95 1.00
DimensionsMarking
Frequency correction factor for ripple current
(Unit : mm)
R. Voltage
(V.DC)
10 16 25 35 50 63 80
100
Code ACEVHJK2A
Mar. 201602