Datasheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
Negative polarity marking (–)
22
6S
Capacitance (µF)
Rated voltage (V.DC)
(6=6.3 V.DC)
Series indentification
(S) or (A)
Mark for Lead-Free
products
(Black dot)
Lot number
A±0.2
W
( ) Reference size
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
L
+
–
0.3 max.
Pressure Relief (010 and larger)
●
Endurance : 85 °C 2000 h
●
Vibration-proof product is available upon request. (08 mm and larger)
●
RoHS compliant
Features
Frequency correction factor for ripple current
DimensionsMarking
Speci cations
Surface Mount Type
Series : S Type : V
High temperature Lead-Free re ow (suffix : A✽)
Example : 6.3 V.DC 22 µF
Marking color : BLACK
Category temperature range –40 °C to +85 °C
Rated voltage range 6.3 V.DC to 50 V.DC
Capacitance range 1 µF to 1500 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Dissipation factor (tan d) Please see the attached characteristics list
Characteristics
at low temperature
V.DC 6.3 10 16 25 35 50
(Impedance ratio at 120 Hz)Z(–25 °C)/Z(+20 °C) 432222
Z(–40 °C)/Z(+20 °C) 864433
Endurance
After applying rated working voltage for 2000 hours (Miniaturization product type 1000 hours)
at +85 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meer the following limits.
Capacitance change
Within ±20 % of the initial value
Size code Cap. change
D8 (06.3×7.7) 2000 hours ±25 %
< D (06.3) Miniature
1000 hours ±30 %
tan d
< 200 % of the initial limit
DC leakege current Within the initial limit
Shelf life
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Resistance to
soldering heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 AEC-Q200 compliant
Size
code
0D
L A, B H. I W P K
B 4.0 5.4
-0.2
4.3 5.5 max 1.8 0.65±0.1 1.0 0.35
-0.20
C 5.0 5.4
-0.2
5.3 6.5 max 2.2 0.65±0.1 1.5 0.35
-0.20
D 6.3 5.4
-0.2
6.6 7.8 max 2.6 0.65±0.1 1.8 0.35
-0.20
D8 6.3 7.7±0.3 6.6 7.8 max 2.6 0.65±0.1 1.8 0.35
-0.20
E 8.0 6.2±0.3 8.3 9.5 max 3.4 0.65±0.1 2.2 0.35
-0.20
F 8.0 10.2±0.3 8.3 10.0 max 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max 3.5 0.90±0.2 4.6 0.70±0.20
+0.1
+0.1
+0.1
+0.15
+0.15
+0.15
+0.15
+0.15
Frequency (Hz) 50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
(Unit : mm)
Mar. 201605