Data Sheet

ManualsBrandsPanasonic ManualsCapacitorsEEEFC1C100R Electrolytic capacitor SMD 10 µF 16 V 20 % (Ø x H) 4 mm x 5.4 mm 1 pc(s)

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ FC

Capacitance (µF)

Rated Voltage Mark

Series identification

Mark for Lead-Free

Products Black Dot

(Square)

Lot number

Negative polarity

marking (–)

jFC

0.3 max.

A±0.2

()reference size

✽L±0.3

φD±0.5

B±0.2

(I)

(P)

(I)

+0.1

–0.2

–

■ Features

●

Endurance : 105 °C 1000 h

●

Low impedance (1/2 for HA series)

●

Vibration-proof product is available upon request. (

)

●

RoHS directive compliant

Surface Mount Type

Series:

Type:

■ Speciﬁ cations

Category Temp. Range –40 °C to +10 5 °C

Rated W.V. Range 6.3 V.DC to 50 V.DC

Nominal Cap. Range 1 µF to 1500 µF

Capacitance Tolerance ±20 % (120 Hz/+20 °C)

DC Leakage Cur rent I

0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)

tan

Please see the attached standard products list

Characteristics

at Low Temperature

W.V. (V) 6.3 10 16 25 35 50

(Impedance ratio at 120 Hz)Z(–25 °C) / Z(+20 °C) 2 2 2 2 2 2

Z(–40 °C) / Z(+20 °C) 3 3 3 3 3 3

Endurance

After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized

at +20 °C, Capacitors shall meet the following limits.

Capacitance change ±20 % of initial measured value

tan

200 % of initial speciﬁ ed value

DC leakage current

initial speciﬁ ed value

Shelf Life

After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance.(With voltage treatment)

Resistance to

Soldering Heat

After reﬂ ow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.

Capacitance change ±10 % of initial measured value

tan

initial speciﬁ ed value

DC leakage current

initial speciﬁ ed value

■ Di men sions in mm (not to scale) ■ Marking

Rated Voltage Mark

(mm)

Size

code

DLA,BH max.I W P K

B4.05.44.35.5 1.8 0.65±0.1 1.0 0.35–0.20 to +0.15

C5.05.45.36.52.20.65±0.1 1.5 0.35–0.20 to +0.15

D6.35.46.67.82.60.65±0.11.80.35–0.20 to +0.15

✽

8.0 6.2 8.3 9.5 3.4 0.65±0.1 2.2 0.35–0.20 to +0.15

✽

8.0 10.2 8.3 10.0 3.4 0.90±0.2 3.1 0.70±0.2

✽

10.0 10.2 10.3 12.0 3.5 0.90±0.2 4.6 0.70±0.2

j6.3 V

A10 V

C16 V

E25 V

V35 V

H50 V

Example:6.3 V 22 µF

Marking color : BLACK

Apr. 2008

Summary of content (2 pages)

PAGE 1
Aluminum Electrolytic Capacitors/ FC Surface Mount Type Series: FC Type: V ■ Features ● ● ● ● Endurance : 105 °C 1000 h Low impedance (1/2 for HA series) Vibration-proof product is available upon request. (φ8 <) RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ Characteristics at Low Temperature –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.
PAGE 2
Aluminum Electrolytic Capacitors/ FC ■ Standard Products Endurance : 105 °C 1000 h Case size W.V. (V) 6.3 10 16 25 35 50 Cap. (±20 %) (µF) 22 47 68 100 220 330 1000 1500 33 100 150 220 470 1000 10 22 47 68 100 220 330 470 680 6.8 22 33 47 68 100 220 330 470 1 2.2 3.3 4.7 6.8 10 22 33 47 100 220 330 1 2.2 3.3 4.7 10 22 33 47 100 220 Dia. Length (mm) 4 5 6.3 6.3 8 8 10 10 5 8 8 8 10 10 4 5 6.3 8 8 10 10 10 10 4 6.3 6.3 8 8 8 10 10 10 4 4 4 4 5 5 6.3 8 8 10 10 10 4 4 4 5 6.3 8 8 10 10 10 (mm) 5.