Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FT
22
Capacitance (µF)
Rated Voltage Mark
Series identification
Lot number
Negative polarity
marking (–)
EFT
A±0.2
W
()Reference size
L
φD±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure Relief (φ10 and larger)
■ Features
●
Endurance: 2000 h at 105 °C
●
Miniaturized, Low ESR (1 size smaller than series FK)
●
Vibration-proof product is available upon request. (
φ
8 mm and larger)
●
RoHS directive compliant
Surface Mount Type
Series:
FT
Type:
V
High temperature Lead-Free refl ow(suffi x:A
✽
)
■ Specifi cations
Category Temp. Range –55 °C to +105 °C
Rated W.V.Range 6.3 V.DC to 50 V.DC
Nominal Cap.Range 10 µF to 2200 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV After 2 minutes
tan
δ
Please see the attached High temperature lead-free refl ow products list.
Endurance
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits.
Capacitance change ±30 % of initial measured value
tan
δ
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan
δ
<
initial specifi ed value
DC leakage current
<
initial specifi ed value
■ Di men sions in mm (not to scale) ■ Marking
Example:25 V 22 µF
Marking color : BLACK
Rated Voltage Mark
(mm)
Size
code
DL
A, B H IWPK
B 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35
- 0.20
C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35
- 0.20
D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
+ 0.15
+ 0.15
+ 0.15
+ 0.15
Cap (µF)
Frequency (Hz)
120 1 k 10 k 100 k to
10 to 470 0.65 0.85 0.95 1.00
680 to 2200 0.70 0.90 0.95 1.00
■ Frequency correction factor for ripple current
j 6.3 V
A 10 V
C 16 V
E 25 V
V 35 V
H 50 V
Oct. 201104