Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/TP
– EEE-57 –
A±0.2
W
()Reference size
L
φD±0.5
H
B±0.2
(I)
K
(P)
(I)
+
0.3 max.
Pressure Relief (φ10 and larger)
220
TPA
Capacitance (µF)
Rated voltage Mark
Series identification
Lot number
Negative polarity
marking (–)
Mark for Lead-Free
Products Black Dot
(Square)
Features
Lower ESR at Low temperature after endurance
Endurance: 3000 h at 125 °C(D8 size : 2000 h)
Automotive
Vibration-proof product is available upon request. (
φ
8 mm and larger)
RoHS directive compliant
Surface Mount Type
Series:
TP
Type:
V
TP
High temperature Lead-Free refl ow(suf x:A
)
Specifi cations
Category Temp. Range 40 °C to +125 °C
Rated W.V.Range 10 V.DC to 35 V.DC
Nominal Cap.Range 47 µF to 470 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV (µA) After 2 minutes
tan
δ
Please see the attached standard products list
Endurance
After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours(D8 size : 2000 h).
the capacitors shall meet the limits specied below.
Capacitance change ±30 % of initial measured value
tan
δ
<
300 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
ESR after
Endurance
(
/100kHz)
Size Code
D8 F G
Initial(+20 °C) 0.45 0.2 0.15
After 2000 h(-40 °C) 40 4.5 3.5
Shelf Life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan
δ
<
initial specifi ed value
DC leakage current
<
initial specifi ed value
Di men sions in mm (not to scale) Marking
Example:10 V 220 µF Marking color : BLACK
Size
code
DLA, B H I W P K
D8 6.3 7.7±0.3 6.6
7.8 max.
2.6 0.65±0.1 1.8
0.35
- 0.20
F 8.0 10.2±0.3 8.3
10.0max.
3.4 0.90±0.2 3.1
0.70±0.20
G 10.0 10.2±0.3 10.3
12.0max.
3.5 0.90±0.2 4.6
0.70±0.20
+ 0.15
Frequency (Hz)
120 1 k 10 k 100 k to
Correction factor 0.65 0.85 0.95 1.00
Frequency correction factor for ripple current
(Unit : mm)
A 10 V
C 16 V
E 25 V
V 35 V
Rated Voltage Mark
00 Nov. 2012

Summary of content (2 pages)