Datasheet

ManualsBrandsPANASONIC ManualsCapacitorsElectrolytic capacitor Radial lead 2.5 mm 220 µF 10 V 20 % (Ø) 6.3 mm 1 pc(s)

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ EB

– EEE-87 –

0D±0.5

05 to08 010

0d±0.05

F±0.5

Sleeve

14 min.

3 min.

(08L15 only L±1.5)=L16 : L±1.0

L20 : L±2.0

Pressure relief

06.3

–

0D±0.5

■ Features

●

Endurance : +105 °C 5000 h to 10000 h

●

Hight ripple hight frequency (Hight Voltage)

●

RoHS directive compliant

Radial Lead Type

Series:

Type:

■ Speci cations

Category Temp. Range –40 °C to +105 °C –25 °C to +105 °C

Rated W.V. Range 10 V.DC to 63 V.DC 160 V.DC to 450 V.DC

Nominal Cap. Range 2.2 μF to 3300 μF 10 μF to 330 μF

Capacitance Tolerance ±20 % (120 Hz/+20 °C)

DC Leakage Cur rent

0.01 CV or 3 (μA)

After 2 minutes ap pli ca tion of rated working voltage at +20 °C (Whichever is greater)

tan

Please see the attached standard products list

Endurance

After following life test with DC voltage and +105 °C±2 °C ripple current value applied

(The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when

the capacitors are restord to 20 °C, the capacitors shall meet the limits specified below.

(10 to 63 V.DC)

Duration :

5×11 to

8×11.5 : 5000 hours

5×15 to

6.3×15 : 7000 hours

8×15 to

12.5×25 : 10000 hours

Capacitance change ±30 % of initial measured value

tan

300 % of initial speciﬁ ed value

DC leakage current

initial speciﬁ ed value

(160 to 450 V.DC)

Duration : 5000 hours

Capacitance change ±20 % of initial measured value

tan

200 % of initial speciﬁ ed value

DC leakage current

initial speciﬁ ed value

Shelf Life

After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance. (With voltage treatment)

Body Dia.

D 5 6.3 8 10 12.5 16 18

Lead Dia.

d 0.5 0.5 0.6 0.6 0.6 0.8 0.8

Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5

■ Frequency correction factor for ripple current

(10 ~ 63 V.DC)

Capacitance

(μF)

Frequency (Hz)

60 120 1 k 10 k 100 k

0.47 to 10 0.75 1.00 1.40 1.55 1.65

22 to 470 0.85 1.00 1.20 1.25 1.30

1000 to 3300 0.95 1.00 1.05 1.10 1.15

W. V.

(V. DC)

Frequency (Hz)

120 1 k

10 k to 30k 30 k to 100k

160 to 250 0.55 0.85 0.90 1.00

350 to 450 0.50 0.80 0.90 1.00

■ Di men sions in mm (not to scale)

(Unit : mm)

01 Oct. 2013

Summary of content (3 pages)

PAGE 1
Aluminum Electrolytic Capacitors/ EB Radial Lead Type Series: EB Type: A ■ Features ● Endurance : +105 °C 5000 h to 10000 h ● Hight ripple hight frequency (Hight Voltage) ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance –40 °C to +105 °C 10 V.DC to 63 V.DC 2.2 μF to 3300 μF –25 °C to +105 °C 160 V.DC to 450 V.DC 10 μF to 330 μF ±20 % (120 Hz/+20 °C) I < 0.
PAGE 2
Aluminum Electrolytic Capacitors/ EB ■ Standard Products Endurance : 105 °C 05×11 to 08×11.5=5000 h, 05×15 to 06.3×15=7000 h, 08×15 to 012.5×25=10000 h Case size Speciﬁcation Lead Length Ripple tan d Endur- Lead Lead Space Cap. W.V. ance Dia. (±20 %) Dia. Length Current Taping Taping (120 Hz) (120 Hz) Straight ✽B ✽H (+105 °C) (+20 °C) (V) (μF) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) 5 15 105 0.30 7000 0.5 2.0 5.0 2.5 100 5 11 66 0.30 5000 0.5 2.0 5.0 2.5 6.3 15 152 0.30 7000 0.5 2.5 5.0 2.
PAGE 3
Aluminum Electrolytic Capacitors/ EB ■ Standard Products Endurance : 105 °C 5000 h Case size W.V. (V) Cap. (±20 %) (μF) 22 33 47 68 160 100 150 220 330 22 33 47 68 200 100 150 220 22 33 47 250 68 100 150 10 22 33 350 47 68 100 10 22 400 33 47 10 22 450 33 47 Dia. (mm) 10 10 12.5 12.5 16 16 18 16 18 16 18 18 10 12.5 12.5 12.5 16 16 18 16 18 18 12.5 12.5 12.5 16 16 18 16 18 18 10 12.5 16 16 18 16 18 18 10 12.5 16 16 18 16 18 12.