Datasheet

ManualsBrandsPANASONIC ManualsCapacitorsElectrolytic capacitor Radial lead 5 mm 68 µF 160 V 20 % (Ø) 12.5 mm 1 pc(s)

Aluminum Electrolytic Capacitors/ ED

 EE87 

Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase

and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006

n Dimensions in mm (not to scale)

n Ripple current Frequency Coefficient

Radial Lead Type

n Features

n Specifications

Japan

Malaysia

China

n Main applications

Electronic ballast, Power supply input circuit

High ripple current (at high frequency)

Endurance: 105 °C 8000,10000h

Including low profile products (20mm height)

RoHS directive compliant

Country of Origin

5.0 5.0 7.5 7.5

Body Dia. φD

Lead Dia. φd

Lead space P

10 12.5 16 18

0.6 0.6 0.8 0.8

φd±0.05

14 min

3 min

φD+0.5 max

P± 0.5

L >20:L+2.0 max

Vent

Sleeve

Frequency (Hz)

Cap.(µF)

50 < f < 120

120 < f < 300

300 < f < 1k 1k < f < 10k

10k < f < 30k

30k < f <100k

Cap. < 100µF

100µF < Cap.

0.30 0.40 0.55 0.70 0.90 1.00

0.35 0.45 0.60 0.75 0.90 1.00

Category temp. range

Rated W.V. Range

Nominal Cap. Range

I < 0.06 CV + 10(µ A)

After 2 minutes application of rated working voltage at +20°C

-25 to + 105°C

160 to 450 V .DC

10 to 330 µ F

±20 % (120Hz/+20°C)

DC Leakage Current

tan δ

Capacitance Tolerance

Endurance

After following life test with DC voltage and +105±2°C ripple current value applied (The sum of

DC and ripple peak voltage shall not exceed the rated working voltage), for regulation times,

the capacitors shall meet the limits specified bellow. Post test requirements at +20°C.

Regulation times of life test: φ 10=8000h, φ 12.5 to φ18=10000h

Capacitance change

tan δ

DC leakage current

±20% of initial measured value

< 200 of initial specified value

< initial specified value

Shelf Life

After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)

Please see the attached standard products list

Characteristics at low

temperature

W.V.(V) 160 200 250 350 400 450

Z(-25°C)/Z(20°C) 333666

Series: Type :

(mm)

(Impedance ratio at 120Hz)

Discontinued

Summary of content (3 pages)

PAGE 1
Aluminum Electrolytic Capacitors/ ED Radial Lead Type Series: ED Type : Discontinued A Country of Origin Japan Malaysia China n Features High ripple current (at high frequency) Endurance: 105 °C 8000,10000h Including low profile products (20mm height) RoHS directive compliant n Main applications Electronic ballast, Power supply input circuit n Specifications -25 to + 105°C 160 to 450 V .DC Category temp. range Rated W.V. Range Nominal Cap.
PAGE 2
Aluminum Electrolytic Capacitors/ ED Discontinued n Standard Products W.V. Cap. (±20%) (V) 160 200 (µF) Lead Length Ripple Length current tan δ Endurance (100kHz) (120Hz) (+20°C) (+105˚C) (hours) ( m m ) ( m m ) (m A ) Dia. Lead Space Straight Taping *B ( m m ) ( m m ) (mm) Part No. Lead Dia. 5.0 Min.Packaging Q'ty Straight Leads Taping (pcs) (pcs) 200 500 10 20 500 0.15 8000 0.6 5.0 33 10 20 580 0.15 8000 0.6 5.0 5.0 EEUED2C330( ) 200 500 47 10 20 750 0.
PAGE 3
Aluminum Electrolytic Capacitors/ ED Discontinued n Standard Products W.V. Cap. (±20%) (V) 350 (µF) 450 Specification Lead Length Ripple tan δ Enducurrent (100kHz) (120Hz) rance (+105˚C) (+20°C) ( m m ) ( m m ) (m A ) (hours) Length 100 18 10 10 20 300 15 12.5 20 410 12.5 25 500 0.24 10000 16 20 600 0.24 10000 22 400 Case size Dia. 31.5 1200 0.20 Lead Dia. (mm) Lead Space Part No. Straight Taping *B (mm) (mm) 7.5 Min.