Datasheet

ManualsBrandsPANASONIC ManualsCapacitorsElectrolytic capacitor Radial lead 7.5 mm 220 µF 160 V 20 % (Ø) 18 mm 1 pc(s)

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors (Radial Lead Type)

0D±0.5

F±0.5

Sleeve

14 min.

3 min.

L±2.0

Pressure relief

–

fd±0.05

●

High ripple current (at high frequency) : 40 % higher than ED Series

●

Endurance : 105 °C 8000 h to 10000 h

●

RoHS compliant

Features

Radial Lead Type

Series : EE Type : A

(Unit : mm)

Speci cations

Dimensions

10 12.5 16 18

0.6 0.6 0.8 0.8

F 5.0 5.0 7.5 7.5

Category temperature range

–25 °C to + 105 °C

Rated voltage range 160 V .DC to 450 V .DC

Capacitance range 10 µF to 330 µF

Capacitance tolerance ±20 % (120 Hz/+20 °C)

Leakage current I < 0.06 CV +10 (µA) After 2 minutes

Dissipation factor

(tan d)

V.DC 160 200 250 350 400 450

(120 Hz/+20 °C)

tan d 0.15 0.15 0.15 0.20 0.24 0.24

Endurance

After following life test with DC voltage and +105 °C±2 °C ripple current value applied

(The sum of DC and ripple peak voltage shall not exceed the rated working voltage),

when the capacitors are restored to 20 °C, the capacitors shall meet the limits speciﬁ ed below.

Duration

010 : 8000 hours

012.5 to 018 : 10000 hours

Capacitance change Within ±20 % of the initial value

tan d

< 200 % of the initial limit

DC leakage current Within the initial limit

Shelf life

After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance. (With voltage treatment)

Rated voltage

(V.DC)

Capacitance

(µF)

Frequency (Hz)

60 < 120 < 300 < 1 k < 10 k < 100 k <

160 to 450

10 to 82 0.25 0.35 0.50 0.65 0.90 1.00

100 to 330 0.30 0.40 0.55 0.70 0.90 1.00

Frequency correction factor for ripple current

Mar. 201603

Summary of content (4 pages)

PAGE 1
Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : EE Type : A Features ● High ripple current (at high frequency) : 40 % higher than ED Series : 105 °C 8000 h to 10000 h ● RoHS compliant ● Endurance Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life –25 °C to + 105 °C 160 V .DC to 450 V .DC 10 µF to 330 µF ±20 % (120 Hz/+20 °C) I < 0.
PAGE 2
Aluminum Electrolytic Capacitors (Radial Lead Type) Case size/Ripple current 160 V.DC Capacitance (µF) Case size (mm) (0D×L) 100 kHz 700 810 1065 470 1350 25 25 20S 25 20S 520 660 680 755 730 1480 1660 1700 1890 1820 16 18 × 31.5 × 25S 910 780 18 × 31.5 1040 10 10 10 68 12.5 × 20 82 12.5 12.5 16 16 18 × × × × × 220 330 150 Ripple current (mA r.m.s.) 105 °C 120 Hz 245 280 370 × 20 × 20 × 20 22 33 47 100 200 V.DC Case size (mm) (0D×L) 120 Hz 300 320 385 100 kHz 850 920 1100 12.
PAGE 3
Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 010=8000 h, 012.5 to 018=10000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 22 33 47 68 82 160 100 150 220 330 22 33 47 68 200 82 100 150 220 330 22 33 47 68 250 82 100 150 220 15 22 33 350 47 68 82 100 0D L 10 10 10 12.5 12.5 12.5 16 16 18 16 18 18 10 10 12.5 12.5 16 16 16 18 16 18 18 10 12.5 12.5 16 16 16 18 16 18 18 18 10 12.5 12.5 16 16 18 16 18 18 18 20 20 20 20 25 25 20 25 20 31.5 25 31.
PAGE 4
Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 010=8000 h, 012.5 to 018=10000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 15 22 400 33 47 68 82 100 10 15 22 450 33 47 56 68 0D L 10 12.5 12.5 16 16 16 18 18 18 18 10 12.5 12.5 16 16 18 16 18 18 18 20 20 25 20 20 25 20 25 31.5 40 20 20 25 20 25 20 31.5 25 31.5 40 Specification Lead length (mm) Ripple Lead space Lead current tan d Endurance dia.