Datasheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (Radial Lead Type)
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L±2.0
Pressure relief
+
fd±0.05
High ripple current (at high frequency) : 40 % higher than ED Series
Endurance : 105 °C 8000 h to 10000 h
RoHS compliant
Features
Radial Lead Type
Series : EE Type : A
(Unit : mm)
Speci cations
Dimensions
0
D
10 12.5 16 18
0
d
0.6 0.6 0.8 0.8
F 5.0 5.0 7.5 7.5
Category temperature range
–25 °C to + 105 °C
Rated voltage range 160 V .DC to 450 V .DC
Capacitance range 10 µF to 330 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage current I < 0.06 CV +10 (µA) After 2 minutes
Dissipation factor
(tan d)
V.DC 160 200 250 350 400 450
(120 Hz/+20 °C)
tan d 0.15 0.15 0.15 0.20 0.24 0.24
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage),
when the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
010 : 8000 hours
012.5 to 018 : 10000 hours
Capacitance change Within ±20 % of the initial value
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Rated voltage
(V.DC)
Capacitance
(µF)
Frequency (Hz)
60 < 120 < 300 < 1 k < 10 k < 100 k <
160 to 450
10 to 82 0.25 0.35 0.50 0.65 0.90 1.00
100 to 330 0.30 0.40 0.55 0.70 0.90 1.00
Frequency correction factor for ripple current
Mar. 201603

Summary of content (4 pages)