Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FM
– EEE-78 –
010
Sleeve
14 min.
3 min. L
=
=
L16 : L±1.5
L20 : L±2.0
Pressure relief
06.3
+
–
08
0D±0.5
F±0.5
0D±0.5
fd±0.05
■ Features
●
Low impedance (40 % to 70 % less than FC Se ries)
●
Endurance : 2000 h to 7000 h at +105 °C
●
RoHS directive compliant
Radial Lead Type
Series:
FM
Type:
A
■ Speci cations
Category Temp. Range –40 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 50 V.DC
Nominal Cap. Range 22 μF to 6800 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV (μA) After 2 minutes
tan
d
W.V. 6.3 10 16 25 35 50
(max.) (120 Hz/+20 °C)
tan
d
0.22 0.19 0.16 0.14 0.12 0.10
Add 0.02 per 1000 μF for products of 1000 μF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
0
5 to
0
6.3 : 2000 hours,
0
8×11.5 to
0
8×15: 3000 hours
0
8×20 to
0
10×16 : 4000 hours,
0
10×20 to
0
12.5×20/
0
16×20: 5000 hours
0
12.5×25 to
0
12.5×35/
0
16×25 : 7000 hours
Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %)
tan
d
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.(V.DC) Cap (μF)
Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 50
22 to 33 0.45 0.55 0.75 0.90 1.00
47 to 330 0.60 0.70 0.85 0.95 1.00
390 to 1000 0.65 0.75 0.90 0.98 1.00
1200 to 6800 0.75 0.80 0.95 1.00 1.00
■ Frequency correction factor for ripple current
Body Dia.
0
D56.3810 12.5 16
Body Length L ————12.5 to 2530 to 40—
Lead Dia.
0
d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5
■ Attention
Not applicable for automotive
■ Di men sions in mm (not to scale)
(Unit : mm)
01 May. 2014