Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HD
φ5toφ8
φD±0.5
φd±0.05
F±0.5
Sleeve
14 min.
3 min. ✽ L
✽ L<16:L±1.5
L>20:L±2.0
Pressure relief
φ6.3<
+
–
φ10<
φD±0.5
■ Features
●
Endurance : 105 °C 1000 h to 2000 h
●
Minaturize, Higher Capacitance :
1 Size Miniturized Product of Current A-NHG
●
RoHS directive compliant
Radial Lead Type
Series:
HD
Type:
A
■ Specifi cations
Category Temp. Range –55 °C to +105 °C
Rated W.V. Range 10 V.DC to 50 V.DC
Nominal Cap. Range 0.1 µ F to 22000 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent
I
<
0.01 CV or 3 (µA) After 2 minutes
(Which is greater)
tan
δ
Please see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration :
φ
5 to
φ
8=1000 hours,
φ
10 to
φ
18=2000 hours
Capacitance change ±20 % of initial measured value
tan
δ
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■ Di men sions in mm (not to scale)
■ Frequency correction factor for ripple current
(mm)
[mm]
Body Dia.
φ
D56.3 8 10 12.5 16 18
Lead Dia.
φ
d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
W.V.(V.DC) Cap. (µF)
Frequency (Hz)
60 120 1 k 10 k 100 k
10 to 50
0.1 to 33 0.75 1.00 1.55 1.80 2.00
47 to 470 0.80 1.00 1.35 1.50 1.50
1000 to 22000 0.85 1.00 1.10 1.15 1.15
Jul. 201100