Datasheet

ManualsBrandsPANASONIC ManualsCapacitorsElectrolytic capacitor Radial lead 7.5 mm 2200 µF 35 V 20 % (Ø x L) 18 mm x 7.3 mm 1 pc(s)

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors (Radial Lead Type)

0D±0.5

F±0.5

Sleeve

14 min.

3 min.

✽

✽ L < 16 : L±1.5

L > 20 : L±2.0

Pressure relief

–

010 <

0D±0.5

fd±0.05

●

Endurance : 125 °C 2000 h to 5000 h or 135 °C 1000 h to 2000 h

●

Smaller than series TA

●

High ripple current (at high frequency) : 20 to 40% higher than TA series

●

RoHS compliant

Features

Speci cations

Frequency correction factor for ripple current

Radial Lead Type

Series : TP Type : A

D81012.516

d 0.6 0.6 0.6 0.8 0.8

F3.55.05.07.5

7.5

Category temperature range

–40 °C to + 135 °C

Rated voltage range 25 V .DC to 35 V .DC

Capacitance range 100 µF to 5100 µF

Capacitance tolerance ±20 % (120 Hz/+20 °C)

Leakage current I < 0.01 CV After 2 minutes

Dissipation factor

(tan d)

V.DC 25 35

(120Hz / +20 °C)

tan d 0.14 0.12

For capacitance value > 1000 µF , add 0.02 per every 1000 µF.

Endurance 1

After following life test with DC voltage and +125 °C±2 °C ripple current value applied. (The

sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the

capacitors are restored to 20 °C, the capacitors shall meet the limits speciﬁ ed below.

Duration

08 : 2000 hours, 010 : 3000 hours, 012.5 : 4000 hours, 016 to 018 : 5000 hours

Capacitance change Within ±30 % of the initial value

tan d

< 300 % of the initial limit

DC leakage current Within the initial limit

Endurance 2

After following life test with DC voltage and +135 °C±2 °C ripple current value applied. (The

sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the

capacitors are restored to 20 °C, the capacitors shall meet the limits speciﬁ ed below.

Duration

08 : 1000 hours, 010 to 018 : 2000 hours

Capacitance change Within ±30 % of the initial value

tan d

< 300 % of the initial limit

DC leakage current Within the initial limit

Shelf Life 1

After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance. (With voltage treatment)

Shelf Life 2

After storage for 1000 hours at +135 °C±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance. (With voltage treatment)

AEC-Q200 AEC-Q200 compliant

Rated voltage

(V.DC)

Capacitance

(µF)

Frequency (Hz)

60 120 1 k 10 k 100 k

25 to 35

to 330 0.55 0.65 0.85 0.90 1.00

390 to 1000 0.70 0.75 0.90 0.95 1.00

1200 to 0.75 0.80 0.90 0.95

1.00

(Unit : mm)

Dimensions

Mar. 201604

Summary of content (2 pages)

PAGE 1
Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : TP Type : A Features ● Endurance : 125 °C 2000 h to 5000 h or 135 °C 1000 h to 2000 h ● Smaller than series TA ● High ripple current (at high frequency) : 20 to 40% higher than TA series ● RoHS compliant Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance 1 Endurance 2 Shelf Life 1 Shelf Life 2 AEC-Q200 –40 °C to + 135 °C 25
PAGE 2
Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 0D 25 35 220 10 330 10 8 470 10 510 10 820 10 1000 12.5 1200 12.5 12.5 1800 16 2000 16 16 2200 18 16 2700 18 16 3300 18 16 3900 18 4700 18 5100 18 100 10 120 10 8 220 10 8 270 10 330 10 390 10 470 12.5 560 12.5 620 12.5 820 12.5 1000 16 1200 16 16 1500 18 1600 16 16 1800 18 16 2000 18 2200 18 2700 18 L 12.5 16 20 16 16 20 20 20 25 20 20 25 20 25 20 31.5 25 31.5 25 31.5 31.5 12.