Datasheet
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-63 –
010
Sleeve
14 min.
3 min.
L
=
Pressure relief
06.3
=L16 : L±1.0 (=08L15, 016L15, 018L15 : L±1.5)
L20 : L±2.0
+
–
08
0D±0.5
F±0.5
0D±0.5
fd±0.05
■ Features
●
Endurance : 105 °C 1000 h to 5000 h
●
Low impedance
● AEC-Q200 qualifi ed
✽
●
RoHS directive compliant
Radial Lead Type
Series:
FC
Type:
A
■ Speci cations
Category Temp. Range
–55 °C to +105 °C
Rated W.V. Range
6.3 V.DC to 10 0 V.DC
Nominal Cap. Range
2.2 μF to 15000 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Cur rent
I
<
0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan
d
W.V. (V) 6.3 10 16 25 35 50 63 100
(120 Hz/+20 °C)
tan
d
0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07
For capacitance value
>
1000 μF, add 0.02 per every 1000 μF.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC
and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to
20 °C, the capacitors shall meet the limits specifi ed bellow.
Duration :
0
4 to
0
6.3: 1000 hours,
0
8: 2000 hours ,
0
10: 3000 hours ,
0
12.5 to
0
18: 5000 hours
Capacitance change ±20 % of initial measured value
tan
d
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.(V.DC) Cap (μF)
Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 100
2.2 to 330 0.55 0.65 0.85 0.90 1.00
390 to 1000 0.70 0.75 0.90 0.95 1.00
1200 to 2200 0.75 0.80 0.90 0.95 1.00
2700 to 15000 0.80 0.85 0.95 1.00 1.00
■ Frequency correction factor for ripple current
L
>
11 L=7
Body Dia.
0
D 4 5 6.3 8 10 12.5 16 18 4 5 6.3
Body Length L
15 to 25 30 to 40
Lead Dia.
0
d 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8 0.45 0.45 0.45
Lead space F 1.5 2.0 2.5 3.5 5.0 5.0 5.0 7.5 7.5 1.5 2.0 2.5
■ Di men sions in mm (not to scale)
(Unit : mm)
✽
This product qualify for AEC-Q200, but it has some deviations.
05 Jul. 2014