Datasheet
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-73 –
010
Sleeve
14 min.
3 min.
L
=
=L16 : L±1.5
L20 : L±2.0
Pressure relief
+
–
08
0D±0.5
F±0.5
0D±0.5
fd±0.05
■ Features
●
Low impedance (10 % to 30 % less than FC Se ries)
Miniaturization (30 % to 40 % less than FC Series)
●
Endurance : 3000 h to 5000 h at +105 °C
● AEC-Q200 qualifi ed
✽
●
RoHS directive compliant
Radial Lead Type
Series:
FK
Type:
A
■ Speci cations
Category Temp. Range –55 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 35 V.DC
Nominal Cap. Range 180 μF to 12000 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV (μA) After 2 minutes
tan
d
W.V. 6.3 10 16 25 35
tan
d
0.22 0.19 0.16 0.14 0.12 (120 Hz/+20 °C)
Add 0.02 per 1000 μF for products of 1000 μF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed bellow.
Duration :
0
8: 3000 hours ,
0
10: 4000 hours ,
0
12.5 to
0
18: 5000 hours
Capacitance change ±20 % of initial measured value
tan
d
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.(V.DC) Cap (μF)
Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 35
180 to 330 0.60 0.70 0.85 0.95 1.00
390 to 1000 0.65 0.75 0.90 0.98 1.00
1200 to 12000 0.75 0.80 0.95 1.00 1.00
■ Frequency correction factor for ripple current
Body Dia.
f
D810 12.5 1618
Body Length L — — 12.5 to 25 30 to 40 — —
Lead Dia.
f
d 0.6 0.6 0.6 0.8 0.8 0.8
Lead space F 3.5 5.0 5.0 5.0 7.5 7.5
■ Di men sions in mm (not to scale)
(Unit : mm)
✽
This product qualify for AEC-Q200, but it has some deviations.
01 May. 2014