Datasheet

Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-73 –
010
Sleeve
14 min.
3 min.
L
=
=L16 : L±1.5
L20 : L±2.0
Pressure relief
+
08
0D±0.5
F±0.5
0D±0.5
fd±0.05
Features
Low impedance (10 % to 30 % less than FC Se ries)
Miniaturization (30 % to 40 % less than FC Series)
Endurance : 3000 h to 5000 h at +105 °C
AEC-Q200 qualifi ed
RoHS directive compliant
Radial Lead Type
Series:
FK
Type:
A
Speci cations
Category Temp. Range 55 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 35 V.DC
Nominal Cap. Range 180 μF to 12000 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV (μA) After 2 minutes
tan
d
W.V. 6.3 10 16 25 35
tan
d
0.22 0.19 0.16 0.14 0.12 (120 Hz/+20 °C)
Add 0.02 per 1000 μF for products of 1000 μF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed bellow.
Duration :
0
8: 3000 hours ,
0
10: 4000 hours ,
0
12.5 to
0
18: 5000 hours
Capacitance change ±20 % of initial measured value
tan
d
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.(V.DC) Cap (μF)
Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 35
180 to 330 0.60 0.70 0.85 0.95 1.00
390 to 1000 0.65 0.75 0.90 0.98 1.00
1200 to 12000 0.75 0.80 0.95 1.00 1.00
Frequency correction factor for ripple current
Body Dia.
f
D810 12.5 1618
Body Length L 12.5 to 25 30 to 40
Lead Dia.
f
d 0.6 0.6 0.6 0.8 0.8 0.8
Lead space F 3.5 5.0 5.0 5.0 7.5 7.5
Di men sions in mm (not to scale)
(Unit : mm)
This product qualify for AEC-Q200, but it has some deviations.
01 May. 2014

Summary of content (5 pages)