Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FM
– EEE-78 –
φ10<
φd±0.05
Sleeve
14 min.
3 min.
L
L<16:L±1.5
L>20:L±2.0
Pressure relief
φ6.3<
+
φ5toφ8
φD±0.5
F±0.5
φD±0.5
Features
Low impedance (40 % to 70 % less than FC Se ries)
Endurance : 2000 h to 7000 h at +105 °C
RoHS directive compliant
Radial Lead Type
Series:
FM
Type:
A
Specifi cations
Category Temp. Range 40 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 50 V.DC
Nominal Cap. Range 22 µF to 6800 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV (µA) After 2 minutes
tan
δ
W.V. 6.3 10 16 25 35 50
(max.) (120 Hz/+20 °C)
tan
δ
0.22 0.19 0.16 0.14 0.12 0.10
Add 0.02 per 1000 µF for products of 1000 µF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
φ
5 to
φ
6.3 : 2000 hours,
φ
8
11.5 to
φ
8
15: 3000 hours
φ
8×20 to
φ
10
16 : 4000 hours,
φ
10
20 to
φ
12.5
20/
φ
16
20: 5000 hours
φ
12.25 to
φ
12.5
35/
φ
16
25 : 7000 hours
Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %)
tan
δ
<
200 % of initial specied value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.(V.DC) Cap (µF)
Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 50
22 to 33 0.45 0.55 0.75 0.90 1.00
47 to 330 0.60 0.70 0.85 0.95 1.00
390 to 1000 0.65 0.75 0.90 0.98 1.00
1200 to 6800 0.75 0.80 0.95 1.00 1.00
Frequency correction factor for ripple current
Body Dia.
φ
D56.3810 12.5 16
Body Length L 12.5 to 25 30 to 40
Lead Dia.
φ
d0.50.50.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5
Attention
Not applicable for automotive
Di men sions in mm (not to scale)
(Unit : mm)
00 Nov. 2012

Summary of content (4 pages)