Datasheet
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (Radial Lead Type)
010 <
Sleeve
14 min.
3 min.
L
✽
✽
L < 16 : L±1.5
L > 20 : L±2.0
Pressure relief
06.3 <
+
–
< 08
0D±0.5
F±0.5
0D±0.5
fd±0.05
●
Low ESR (Same as FM Series)
●
Endurance : 105 °C 5000 h to 10000 h
●
RoHS compliant
●
Malaysia
●
Not applicable for automotive
Features Country of origin
Attention
Radial Lead Type
Series : FR Type : A
Frequency correction factor for ripple current
Dimensions
Speci cations
Category temperature range
–40 °C to +105 °C
Rated voltage range 6.3 V.DC to 100 V.DC
Capacitance range 4.7 µF to 8200 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage current I < 0.01 CV (µA) After 2 minutes
Dissipation factor
(tan
d
)
V.DC
6.3 10 16 25 35 50 63 100
(120 Hz/+20 °C)
tan d 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08
Add 0.02 per 1000 µF for products of 1000 µF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
05×11/ 06.3×11.2 : 5000 hours
08×11.5/ 010×12.5 : 6000 hours (✽ Only EEUFR1V331U (010×12.5) 5000 hours)
08×15/ 010×16 : 8000 hours, 08×20 : 9000 hours
010×20 to 010×25/ 012.5×20 to 012.5×35/ 016×20 to 016×25 : 10000 hours
Capacitance change
Within ±25 % of the initial value (6.3 V.DC to 10 V.DC : ±30 %)
tan
d
< 200 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Rated voltage (V.DC) Capacitance (µF)
Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 100
4.7 to 33 0.45 0.55 0.75 0.90 1.00
47 to 330 0.60 0.70 0.85 0.95 1.00
390 to 1000 0.65 0.75 0.90 0.98 1.00
1200 to 8200 0.75 0.80 0.95 1.00 1.00
0
D56.381012.516
L ————12.5 to 2530 to 35—
0
d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
F 2.0 2.5 3.5 5.0 5.0 7.5
(Unit : mm)
Mar. 201607