Datasheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (Radial Lead Type)
08
0D±0.5
F±0.5
Sleeve
14 min.
3 min. L
✽
✽ L < 16 : L±1.0 (016×15, 018×15 : L±1.5)
L > 20 : L±2.0
Pressure relief
+
–
010 <
0D±0.5
fd±0.05
●
Endurance: 125 °C 2000 h
●
Heat cycle: 1000 cycle –40 °C to +125 °C
●
RoHS compliant
Features
(Unit : mm)
Speci cations
Dimensions
Frequency correction factor for ripple current
Radial Lead Type
Series : TA Type : A
0
D 8 10 12.5 16 18
0
d 0.6 0.6 0.6 0.8 0.8
F 3.5 5.0 5.0 7.5 7.5
Category temperature range –40 °C to + 125 °C
Rated voltage range 10 V .DC to 63 V .DC
Capacitance range 2.2 µF to 4700 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage current I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Dissipation factor
(tan d)
V.DC 10 16 25 35 50 63
(120Hz / +20 °C)
tan d 0.20 0.16 0.14 0.12 0.10 0.09
For capacitance value > 1000 µF , add 0.02 per every 1000 µF.
Endurance
After following life test with DC voltage and +125 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours,
when the capacitors are restored to 20 °C, the capacitors, shall meet the limits specifi ed below.
Capacitance change Within ±30 % of the initial value
tan d
< 300 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
AEC-Q200 AEC-Q200 compliant
Rated voltage
(V.DC)
Capacitance
(µF)
Frequency (Hz)
60 120 1 k 10 k 100 k
10 to 63
2.2 to 330 0.55 0.65 0.85 0.90 1.00
470 to 1000 0.70 0.75 0.90 0.95 1.00
2200 to 4700 0.75 0.80 0.90 0.95
1.00
Oct. 201605