Datasheet

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TG
– EEE-50 –
A±0.2
W
( ) Reference size
L
0D±0.5
H
B±0.2
(I)
K
(P)
(I)
+
–
0.3 max.
Pressure Relief (010 and larger)

5("
Capacitance (μF)
Rated Voltage Mark
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Lot number
Negative polarity
marking (–)

5("
Capacitance (μF)
Rated Voltage Mark
Series identification
Lot number
Negative polarity
marking (–)
■ Features
●
Endurance:125 °C 1000 h to 2000 h
●
Miniaturization (40 % less than TA Series)
●
Low ESR (Low temp)
●
Vibration-proof product is available upon request. (
0
8 mm and larger)
● AEC-Q200 qualifi ed
✽
●
RoHS directive compliant (Parts No
0
8 to
0
10 : EEE
✽
,
0
12.5 to
0
18 : EEV
✽
)
Surface Mount Type
Series:
TG
Type:
V
■ Speci cations
Category Temp. Range –40 °C to +125 °C
Rated W.V. Range 10 V.DC to 100 V.DC
Nominal Cap. Range 10 μF to 4700 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV After 2 minutes
tan
d
Please see the attached standard products list
Characteristics
at Low Temperature
W.V. (V) 10 16 25 35 50 63 80 100
(Impedance ratio at 120 Hz) Z(–25 °C)/Z(+20 °C)32222222
Z(–40 °C)/Z(+20 °C)64433333
Endurance
After applying rated working voltage for 1000 hours (
0
8×6.2), 2000 hours (
0
8×10.2
<
) at +125 °C±2 °C and then
being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±30 % of initial measured value (code U : ±35 %)
tan
d
<
300 % of initial specifi ed value (code U : ±350 %)
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan
d
<
initial specifi ed value
DC leakage current
<
initial specifi ed value
■ Di men sions in mm (not to scale) ■ Marking
Example : 10 V 100 μF, 10 V 1000 μF
Marking coloc : BLACK
Lead-Free products (
<
0
10)
Lead-Free products (
>
0
12.5)
Size
code
D L A, B H I W P K
E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35
- 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.30
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.30
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30
+ 0.15
Frequency (Hz)
120 1 k 10 k 100 k to
Correction factor 0.65 0.85 0.95 1.00
■ Frequency correction factor for ripple current
(Unit : mm)
A 10 V
C 16 V
E 25 V
V 35 V
Rated Voltage Mark
H 50 V
J 63 V
K 80 V
2A 100 V
✽
This product qualify for AEC-Q200, but it has some deviations.
01 Mar. 2014