Owner's Manual

SENSOR
REHEAT
NN-SC678C
Location of Controls
16
18
19
22
24
25
17
20
21
23
26
27
29
28
30
1 External Air Vent
2 Internal Air Vent
3 Door Safety Lock System
4 Exhaust Air Vent
21
(See page 12)
22 Keep Warm Pad (See page 1
23 Quick 30 Pad (See page 1
Stop/Reset Pad is pressed once
during oven operation, Start
Pad must be pressed again to
5 Control Panel
6 Identification Plate
24 More Pad
25 Less Pad
(See page 1
(See page 1
restart oven.
7 Glass Tray
8 Roller Ring
9 Heat/Vapor Barrier Film
(do not remove)
10 Waveguide Cover
(do not remove)
11 Door Release Button
12 Warning label
13 Menu label
14 Power Supply Cord
15 Power Supply Plug
16 Display Window
17 Popcorn Pad (See page 11)
18 Sensor Reheat Pad
(See page 13)
19 Sensor Cook Pad (See page 13)
20 Power level Pad (See page
26 Number Pads
27 Timer Pad
(See page 14)
28
Clock Pad
(See page 8)
29 Stop/Reset Pad
Before cooking: One tap clears
all your instructions. During
cooking: one tap temporarily
stops the cooking process.
Another tap cancels all your
instructions, and time of day
or colon appears in the display
window.
30 Start Pad
After cooking program setting,
one tap allows oven to begin
functioning. If door is opened or
Beep Sound:
When a pad is pressed correctly, a
beep will be heard. If a pad is pressed
and no beep is heard, the unit did
not or cannot accept the instruction.
When operating, the oven will beep
twice between programmed stages.
At the end of any complete program,
the oven will beep 5 times.
NOTE:
If no operation after cooking
program setting, 6 minutes later, the
oven will automatically cancel the
cooking program. The display will
return to clock or colon display.
Turbo Defrost Pad
7
12
15
12
13
11
14
SENSOR
REHEAT
NN-SC678C
1)
1)
1)
1)
9)
TURBO
DEFROST
TURBO
DEFROST