0-MAY-2013 11:34 and the blade block. 3. Remove 5 screws ard open tie reusing. (See Fig. 74} 4. Remove the battery from the chases. {See Fig. 78) [ER2051] 3. Disconnect the prows cord drum the AC outfield, and remove it power o from the trimmer. 2. Remove the blade from the trimmer. 3. Remove 3 resews and open the housing (See Fig. 8 4. Remove the circuit slack from the housing. Raise the battery and In Sort o screwdriver into (2] to turnover o terminal. Move the terminal farm the other SIDS i the ® manner.