Data Sheet

ManualsBrandsPanasonic ManualsPassive ComponentsPanasonic ERJ6ENF3831V Cermet resistor 3830 Ω SMD 0805 0.125 W 1 % 100 ±ppm/°C 1 pc(s) Tape cut

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Thick Film Chip Resistors

Thick Film

Chip Resistors

Product Code

Size, Power Rating

01005

0201

0402

0603

0805

1206

1210

1812

2010

2512

XGN

1GN

2GE

3GE

6GE

8GE

12Z

0.031 W

0.05 W

0.1 W

0.125 W

0.25 W

0.5 W

0.75 W

1 W

Power R.

Marking

Code

✽

Nil

Marking

Value Marking on

black side

No marking

Resistance Tolerance

Code

Tolerance

±5 %

Jumper

The ﬁrst two digits are signiﬁcant ﬁgures of resistance and

the third one denotes number of zeros following.

Decimal Point is expressed by R as 4.7 = 4R7.

Jumper is expressed by R00.

Resistance Value

Packaging Methods

Code

Packaging Part No.

Embossed Carrier Taping

W4P1, 40,000 pcs.

Pressed Carrier Taping

W8P2, 20,000 pcs.

Pressed Carrier Taping

2 mm pitch, 15,000 pcs.

ERJXGN

Punched Carrier Taping

2 mm pitch, 20,000 pcs.

Embossed Carrier Taping

4 mm pitch, 5,000 pcs.

Punched Carrier Taping

2 mm pitch, 10,000 pcs.

ERJ2GE

ERJ1GN

Embossed Carrier Taping

4 mm pitch, 4,000 pcs.

ERJ1T

ERJ14

ERJ12

ERJ12Z

Code

Punched Carrier Taping

4 mm pitch, 5,000 pcs.

ERJ3GE

ERJ6GE

ERJ8GE

Inch

Thick Film Chip Resistors

Type: ERJ XG, 1G, 2G, 3G, 6G,

8G, 14, 12, 12Z, 1T

Explanation of Part Numbers

Features

●

Small size and lightweight

●

High reliability

Metal glaze thick ﬁ lm resistive element and three layers of electrodes

●

Compatible with placement machines

Taping packaging available

●

Suitable for both reﬂ ow and ﬂ ow sol der ing

●

Reference Standards

IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B

●

AEC-Q200 qualiﬁ ed (Exemption ERJXG)

●

RoHS compliant

✽ When omitted, the rest of the P/N factors shall be moved up respectively.

(Only XGN, 1GN, 2GE type)

■

As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,

Please see Data Files

●

ERJXGN, 1GN, 2GE, 3GE, 6GE, 8GE, 14, 12, 12Z, 1T Type, ±5 %

Nov. 201706

Summary of content (3 pages)

PAGE 1
Thick Film Chip Resistors Thick Film Chip Resistors Type: ERJ XG, 1G, 2G, 3G, 6G, 8G, 14, 12, 12Z, 1T Features ● Small size and lightweight reliability Metal glaze thick film resistive element and three layers of electrodes ● Compatible with placement machines Taping packaging available ● Suitable for both reflow and flow soldering ● Reference Standards IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B ● AEC-Q200 qualified (Exemption ERJXG) ● RoHS compliant ● High ■ As for Packaging Methods, Land Pattern, Solder
PAGE 2
Thick Film Chip Resistors Construction Dimensions in mm (not to scale) L a W Protective coating Electrode (Inner) Alumina substrate t b Dimensions (mm) Part No. Electrode (Between) Mass (Weight) (g/1000 pcs.) L W a b t ERJXG 0.40±0.02 0.20±0.02 0.10±0.03 0.10±0.03 0.13±0.02 0.04 ERJ1G 0.60 ±0.03 ±0.03 0.30 0.10 ±0.05 0.15 ±0.05 0.23 ±0.03 0.15 ERJ2G 1.00±0.05 0.50±0.05 0.20±0.10 0.25±0.05 0.35±0.05 0.8 ±0.15 +0.15 ±0.20 ±0.15 ±0.10 ERJ3G 1.60 0.30 0.30 0.
PAGE 3
Thick Film Chip Resistors Perfomance Test Item Resistance T. C. R. Performance Requirements Resistor type Jumper type Within Specified 50m Ω or less Tolerance Within Specified 50m Ω or less T. C. R. Test Conditions 20 °C +25 °C/+155 °C (ERJXG, ERJ1G : +25 °C/+125 °C) Overload ±2% 50m Ω or less Resistance to Soldering Heat Rapid Change of Temperature High Temperature Exposure Damp Heat, Steady State ±1% 50m Ω or less ±1% 50m Ω or less Rated Voltage × 2.5, 5 s Jumper type : Max.