Operating Instructions

23
Problem Action
Cleaning liquid leaked
from the cleaning
liquid unit.
Do not press the cleaning
liquid unit removal button
during any mode.
Place the self‑cleaning
recharger horizontally.
If you use the self‑cleaning
recharger when the shaver
is wet or when soap or
shaving gel is on the shaver,
cleaning liquid may leak.
The cleaning liquid unit
cannot be removed.
Place the self‑cleaning
recharger on a hard, at
surface.
(See page 12.)
The mode does not
start.
Check that the AC adaptor is
connected to the self‑cleaning
recharger, and that the adaptor
is plugged in to a household
outlet. (See page 15.)
Conrm that the shaver is
properly attached to the
self‑cleaning recharger.
(See page 15.)
The Clean or Dry function
may not operate under
extreme low temperatures
(approximately 0 °C or lower).
Check if the STATUS lamp
is glowing. (See page 20.)
Problem Action
The shaver cannot be
charged.
Gently wipe the main body
rear terminals and the
charging terminals of the
self‑cleaning recharger with
a cloth or tissue dampened
with water.
Makes a loud sound.
During cleaning:
The self‑cleaning
recharger makes a loud
sound due to the cleaning
of the blades.
After cleaning:
The self‑cleaning
recharger makes a loud
sound due to the removal
of water droplets in order
to speed drying.
The sound after cleaning is
different from the sound
during cleaning. The water
level has dropped and it is
removing water droplets
from the blades after
cleaning. This does not
indicate a problem.