Operating Instructions

18
• The power switch is locked when the switch lock lamp
(
) blinks for 5 seconds and the shaver does not
operate even though the power switch is pressed.
Switching the shaver head
You can change the pivot action.
FREE
The shaver head is moved to
prevent missed spots.
FREE
LOCK
LOCK
You can lock the shaver head.
FREE
LOCK
FREE
Using the trimmer
1. Slide the trimmer handle up to
the “
” position so that the
trimmer stands upright.
2. Press
and use.
FREE
LOCK
Press and hold the top knob (a)
and slide the trimmer handle
down to lower the trimmer.
FREE
LOCK

Tips for better usage
Apply the trimmer edge perpendicular to skin gently
and move downward slowly.
Trimming sideburns Pre‑shave of long beards

We recommend cleaning the shaver after each use.
1
Insert the shaver into the
self-cleaning recharger
[B] and plug the adaptor
[C] into a household
outlet� (See page 14�)
• Check that the charge status
lamp (
) is glowing.
• When the LOW lamp or the
STATUS lamp lights up, see
page 23.
1
2
1
2
Press �
The CLEAN lamp and the DRY lamp glow, and the
“AUTO” mode will start after approximately 6 seconds.
• It is not possible to change the mode after the
“AUTO” mode has started.
Clean
10 min

80 min*
Charge
0 to 60 min