Operating Instructions

17
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
While using After use
The remaining battery
capacity are shown and
then turn off after
5 seconds.
• Approximate amount of
battery capacity is
displayed as 20 – 100.
• The shaving sensor
lamp (
) blinks.
The remaining battery
capacity blink and then
turn off after 5 seconds.
When the battery capacity is low
“20” blinks when operating the shaver.
• You can shave 2 to 3 times after “20” blinks.
(This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient
temperature lower than approximately 5 °C.
• The shaving sensor may not respond depending on the
type and quantity of the shaving gel. This is not abnormal.
• Depending on the beard thickness or the amount of
beard trimmings in the shaver head, the shaving
sensor may not react and the driving sound may not
change. This is not abnormal.
• 

• The sonic vibration cleaning mode is activated when
the power switch is pressed for more than 2 seconds
while the shaver is not operating. (See page 19.)
You cannot shave in this mode.

Locking the power switch
1. Press once
and then release.
• The shaver
starts
operating.
2.
Press for more
than 2 seconds
until the switch
lock lamp (
)
turns on.
• The shaver will
stop operating.
3.
Release .
• The switch
lock lamp
(
) will
light up for
5 seconds
and turn off.
Unlocking the power switch
1. Press for more than
2 seconds until the
switch lock lamp (
)
turns off.
2. Once the shaver starts
operating, release
.
• The switch lock lamp
(
) will turn off.
ES-LV97_EU.indb 17 2019/06/05 21:17:20