Use and Care Manual

English

Wet cleaning

Epilation head/Shaver head

1. Lift the frame, fast/gentle/beginner caps upward while

holding the frame release rib [B3]/the cap release rib

[CDE7] or remove the frame by pushing the frame

release button [H].

2. Apply liquid hand soap to the discs and the

blades.

3. Turn the switch on and then wet the discs and

the blades to create foam.

4. Wash the head with water to wash out

hair.

• Do not use hot water.

• If soap is not completely washed away,

then a white deposit can accumulate

and prevent the discs and the blades

from moving smoothly.

5. Turn the switch off, wipe the appliance

with a dry cloth and dry it well.

Foot care head

1. Apply liquid hand soap to the central part of the ﬁle.

2. Pour a small amount of water on the ﬁle and turn the

switch on.

3. Rinse any debris thoroughly with water or

lukewarm water.

4. After turning the switch off, remove

the frame and rinse inside.

5. Wipe with a dry cloth

and dry in a well‑

ventilated location.

ES-WD94_AM.indb 12 2011/12/16 19:12:37