Datasheet

S P E C F I L E
ET-PKD510H
Ceiling mount bracket for high ceilings
As of May 2012
SFD12A010
1 / 1
157
(6-3/16)
157
(6-3/16)
(16-1/2 – 21-7/32)
419 – 539
560 – 680
(22-1/16 – 26-25/32)
298
87.5
(3-7/16)
87.5
(3-7/16)
(11-23/32)
432
(17)
Projector
Attachment
plate
Attachment plate
Adjustable in
40 mm (1-9/16) steps
∅ 60.5
(∅ 2-3/8)
∅
Specifications
Attachment plateIllustration shows the bracket attached to a projector.
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . . . . 1
Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pole support bracket 1 . . . . . . . . . . . . . . . . . . . . 1
Pole support bracket 2 . . . . . . . . . . . . . . . . . . . . 1
Pole base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hexagonal head bolt (M6 × 110) . . . . . . . . . . . . 1
Spring washer (M6) . . . . . . . . . . . . . . . . . . . . . . 1
Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hexagonal nut . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts (M6 × 30) . . . . . . 6
Washer-fitted hexagonal bolts (M6 × 16) . . . . . 32
Washer-fitted hexagonal bolts (M8 × 20) . . . . . . 4
Drop prevention kit . . . . . . . . . . . . . . . . . . . . . . . 1
*
Average value. May differ depending on the actual unit.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is used when mounting a Panasonic's applicable projector to high ceilings.
C a u t i o n :
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
∅ 12 (∅ 15/32)
2-3-R6
(2-3-R1/4)
175 (6-7/8)
300 (11-13/16)
314 (12-3 / 8 )
34 4 (13-17/ 32)
Vertical correction angle: +5°, -17°
Horizontal slant correction angle: ±2.5°
Horizontal turn correction angle: ±1.2°
Dimensions (W × H × D): 350 × 409–529 × 535 mm
(13-25/32 × 16-3/32–20-13/16 × 21-1/16 inches)
Weight*: Approximately 13.5 kg (29.8 lbs)
Applicable projector: PT-DZ21K/DS20K/DW17K
Weights and dimensions shown are approximate.
Specifications subject to change without notice.