Datasheet
S P E C F I L E
ET-PKE16S
Ceiling mount bracket for low ceilings
As of September 2011
SFL11A019
1 / 1
Weights and dimensions shown are approximate. Specifications subject to change without notice.
292.5
(11-17/32)
10°
10°
469
(18-15/32)
428.5
(16-7/8)
386.5
25*
(31/32)*
650
(25-19/32)
A*
1
(15-7/32)
From center of
rotation to center
of lens
*
340
(13-3/8)
90
(3-17/32)
90
(3-17/32)
340
10°
10°
(13-3/8)
Projector
13
×
20
(1/2
×
25/32)
4–∅ 13 (∅ 1/2)
5°
5°
Specifications
Vertical correction angle: ±15°
Horizontal slant correction angle: ±5°
Horizontal turn correction angle: ±10°
Dimensions (W × H × D): 400 × 205 × 400 mm
(15-3/4˝ × 8-1/16˝ × 15 -3/4 ˝)
Weight: Approx. 8.5 kg* (18.7 lbs*)
Applicable bracket assembly: ET-PKE16B
Parts
Projector mount bracket . . . . . . . . . . . . . . . . . . . 1
*
Average value. May differ depending on models.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is used when mounting a Panasonic projector to low ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional ET-PKE16B bracket assembly.
C a u t i o n :
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
The illustration shows the ceiling mount bracket
when it is combined with the ET-PKE16B and
the PT-EX16K is attached.