Remote Control Operation Guide Welcome to the world of Home Theater. This remote control is the key to your home theater experience. Model No. EUR7722KM0 First, turn on the receiver. Now, you can operate other Home Theater components. Page 2 Page 4 Page 2 Page 4 Page 3 Page 5 You may need to enter a code to operate some equipment.
TV Watching TV DVD PLAYER Watching DVDs Switch on Switch on Switch on the television and select input Switch on the player and start play Switch on the television and select input Switch off Switch off Operating the DVD player Operating the TV Change the channels sequentially Clear the menus or return to the previous menu Show disc menus Show player menus Select and enter menu items With some Panasonic DVD players, press [FUNCTIONS] for the “DISPLAY” function.
DVD RECORDER Watching DVDs Operating the DVD recorder Switch on Switch on the television and select input Select drive If it does not change Switch on the recorder and start play Switch off After performing the following operations, press this button again. 1. Press [DVD RECORDER]. 2. While pressing [ENTER], press and hold [8] for approximately 2 seconds. To return In step 2 above, while pressing [ENTER], press and hold [9] for approximately 2 seconds.
VCR CD PLAYER Watching videotapes Listening to CDs Switch on Switch on Switch on the player and start play Switch on the television and select input Switch off Switch on the player and start play Operating the CD player Switch off Start play from a selected track Operating the video deck Specify a disc [3- or 5-disc changer] Stop play Change the channels sequentially Start play from a specified disc [MEGA CD changer] (holds more than 50 discs) Pause play Stop play Skip tracks during play Pau
RECEIVER Listening to the radio Select FM or AM (Press and hold) Adjusting speaker channel balance Switch off Start a test signal Operating the radio Select the speaker channel and adjust its output level Change the preset channels sequentially Stop the test signal Select the preset channel directly Select radio stations by frequency Other functions DOLBY PRO LOGIC x MODE Select MOVIE (DOLBY EX), MUSIC or GAME when Dolby Pro Logic x mode or Dolby Pro Logic mode is on When you select MUSIC To canc
CODES This remote control can operate Panasonic and Technics audio-visual equipment that has remote control sensors. You may need to change the remote control code. It can also operate some other brands of televisions, video cassette players, and DVD players. Check the table for the brand and enter the code as follows. Changing the codes TV VCR The remote control outputs the on/off signal. If the code is correct, the equipment turns on or off. If it doesn’t, try entering another code.