Specifications

ARCHITECTURAL SPECIFICATIONS
PANASONIC ADVANCED VENTILATION SERIES
Plug 'N Play ™ Modules
FV-VS15VK1: Multi-Speed with Time Delay
Allows you to select the proper CFM settings to satisfy ASHRAE 62.2 continuous ventilation requirements.
The fan runs continuously at a pre-set lower level (0, 30-100 CFM, in 10 CFM increments on 50-80-110
CFM models; or 0, 50-120 CFM, in 10 CFM increments on 110-130-150 CFM models), then elevates to a
maximum level of operation (50-80-110 or 110-130-150 CFM) when the wall switch is turned on, or when
the motion sensor or Condensation Sensor module is activated. A High/Low delay timer returns the fan to
the pre-set CFM level after a period of time set by the user.
FV-MSVK1: Motion Sensor
Automatically activates when someone enters the room. Once the settings have been applied, the fan
becomes truly automatic. This module also activates a 20 minute delay off timer for the fan.
FV-CSVK1: Condensation Sensor
Helps control bathroom condensation to prevent mold and mildew. Sensor technology detects relative
humidity and temperature to anticipate dew point, automatically turning the fan on to control humidity. Built-
in Relative Humidity (RH) sensitivity adjustment enables fine tuning for moist conditions and for satisfying
CalGreen requirements. When the condensation sensor is used in conjunction with multi-speed
functionality, the fan will kick up to high speed when the condensation sensor detects moisture
in the room. This module also activates a 20 minute delay off timer for the fan.
FV-NLVK1: LED Night Light
A photocell automatically turns on the 1 watt LED night light when darkness is sensed in the room.
High/Low brightness switch enables you to fine tune the photocell to work in conjunction with the darkness
level of your bathroom. This module also activates an automatic 20 minute delay off timer for the fan.