Install Instructions

Grille

Self-drilling

screw

Installation

instructions

Warranty

sheet

Machine

screw

(M4X8)

Quick

Start

Guide

3 inch duct

reducer

(optional part)

Part name Appearance Quantity Part name Appearance Quantity

Flex-Z Fast

bracket

(with 4

tapping screws

-ST4.2X20)

DESCRIPTION

These products are listed by UL under UL file No. E78414.

These products use a sirocco fan driven by a DC motor powered by an integral transformer. The

motor is designed to have long operating life, high dynamic response, higher speed ranges and

energy savings. The grille covering the fan body is a spring-attached, quick removal type. A damper

for preventing air counter flow is provided. The blower uses a high-capacity sirocco fan developed to

reduce the noise level.

SUPPLIED ACCESSORIES

UNPACKING

Unpack and carefully remove the unit from carton.

Refer to the Supplied Accessories list to verify that all parts are present.

(FV-0511VFC1 only)

This Panasonic ventilating fan model is equipped with a humidity sensor that turns the fan on

automatically when humidity increases rapidly, or when humidity rises above

a 30 % ~ 80 % relative

humidity set-point.

GENERAL SAFETY INFORMATION CONTINUED

Provide make up air for proper ventilation.

Do not install the unit where ducts are configured as shown in below.

Do not connect multiple units in parallel. If two or more units are connected to one switch in

parallel, the units may not function.

Bend close to duct adaptor

Squeezed ductSuccessive bendingExcessive bending

Adaptor

English