Submittal Sheet

Specification Submittal Data / Panasonic Ventilation Fan/Heater
FV-0511VH1
4" or 6" duct
IAQ20079ST
R4
FV-0511VH1
䢢䢹䢯䢳䢱䢴䢤䢢
䢢䢳䢲䢯䢳䢱䢶䢤䢢
䢢䢳䢸䢤䢢
䢢䢳䢵䢯䢳䢱䢶䢤䢢
䢢䢳䢺䢯䢳䢱䢶䢤䢢
䢢䢶䢤䢢
Description:
Ventilating fan/heater shall be low noise ceiling
mount type rated for continuous run. Fan/heater shall
be certied by the Home Ventilating Institute (HVI).
Heating elements shall be included. Evaluated by
Underwriters Laboratories and conform to both UL
and cUL safety standards. Fan/heater is not intended
for installation over a tub/shower enclosure.
Motor/Blower:
• Enclosed brushless ECM motor technology rated
for continuous run.
• Fan ventilation rates shall be manually adjustable
for 50-80-110 CFM.
• Power rating shall be 120 volts and 60 Hz.
• Motor equipped with thermal–cutoff fuse.
• Removable with permanently lubricated plug-in
motor.
• Minimum 20 Amp dedicated circuit required.
Housing:
• 26 gauge Zinc-Aluminum-Magnesium (ZAM)
housing.
• Integrated dual 4” or 6” diameter duct adapter.
• Built-in back draft damper.
• Built-in metal ange provides blocking for
penetrations through drywall as an Air Barrier,
and assists with the decrease in leakage in the
building envelope during blower door testing.
• Building Envelope during blower door testing.
• Suitable for installation in ceilings insulated up to
R60.
• Articulating and expandable installation bracket up
to 24".
Grille:
• Attractive design using Poly Pro material.
• Attaches directly to housing with torsion springs.
• Circulation grille with built-in diffuser for higher
output velocity and directional heat throw.
Heater:
• 1600W Positive Temperature Coefcient (PTC)
heater for greater safety and reliability.
• Heater is self-limiting. As it approaches designed
operating temperature, the electrical consumption
automatically decreases, which prevents
overheating.
Warranty:
• 6 years ECM Motor, 5 years LED, 3 years all other
parts.
Architectural Specications:
Ventilation fan/heater combination shall be ceiling
mount, with built-in speed selector. Select from
50/80/110 CFM and no more than <0.3/<0.3/0.7
sone as certied by the Home Ventilating Institute
(HVI) at 0.1 static pressure in inches water gauge
(w.g.), with 51/82/112 CFM and no more than
0.8/1.0/1.5 sone as certied by HVI at 0.25 w.g.,
and no less than 53/82/110 CFM at 0.375 w.g.
Power Consumption shall be no greater than
4.7/7.7/12 watts at 0.1 w.g., 8.6/13.3/19.0 watts at
0.25 w.g., and 12.3/18.2/26.0 watts at 0.375 w.g.
Energy efciency shall be no less than 10.6/10.4/9.2
CFM/watt at 0.1 w.g. 5.9/6.2/5.9 CFM/watt at 0.25,
and 4.3/4.5/4.0 CFM/Watt at 0.375 w.g. Power
rating shall be 120v/60Hz. Minimum 20 Amp
dedicated circuit required. Duct diameter shall be
inclusive of an integrated dual 4" or 6" duct adapter.
Also suitable for installation in ceilings insulated up to
R60. Fan/heater is not intended for installation over a
tub/shower enclosure. Fan/heater can be used to
comply with ASHRAE 62.2. Heating element power
consumption shall be no less than 1600 watts.
Fan/Heater shall also include a circulation grille that
incorporates a diffuser for higher output velocity and
directional heat throw.
Performance Curve
4" Duct
Panasonic Life Solutions Company of America
IAQ Division
Two Riverfront Plaza, Newark, NJ 07102
us.panasonic.com/ventfans
For complete Installation Instructions visit us.panasonic.com/ventfans
Model Quantity Comments Project:
Location:
Architect:
Engineer:
Contractor:
Submitted by:
Date:
*Industry research indicates static pressure in typical installations ranges from 0.20" to 0.375".
** HVI testing and certication based on 4" duct.
Static Pressure (inch w.g.)
Airflow (CFM)
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0 10 20 30 40 50 60 70 80 90 100 110 120
110CFM
80CFM
50CFM
4" 20ft duct
4" 40ft duct
4" 60ft duct
4" 80ft duct
4" 100ft duct
4" 4" 4"
Static Pressure in inches w.g.
0.1
Air Volume (CFM)
Noise (sones)
Power Consumption (watts)
Energy Efciency (CFM/Watt)
Speed (RPM)
Current (amps)
MAX. Current (amps)
0.50
Power Rating (V/Hz)
120/60
Motor Type
ECM
ENERGY STAR rated
N/A - No ESTAR category for fan/heater
0.25 0.375 0.1 0.25 0.375 0.1 0.25 0.375
110 112 110
-
80 82 82 50 51 53
12 19.0 26.0 7.7 13.3 18.2 4.7 8.6 12.3
9.2 5.9 4 10.4 6.2 4.5 10.6 5.9 4.3
861 1090 1249 736 1008 1173 638 930 1112
0.24 0.37 0.49 0.16 0.26 0.35 0.10 0.18 0.25
0.7 1.5 <0.3 1.0 - <0.3 0.8 -
WhisperWarm DC FV-0511VH1
ECM Motor Technology:
When the fan senses static pressure,
its speed is automatically increased
to ensure that the desired CFM is not
compromised, which allows the fan to
perform as rated.
Characteristics
(HVI tested data
with 4" Duct)