Installation Guide

ManualsBrandsPanasonic ManualsBathWhisperSense DC fan-LED Lights Motion and Humidity Sensors Delay Timer Pick-A-Flow Speed Selector 50, 80 or 110 CFM

INSTALLATION INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before attempting to install, operate or service

the Panasonic product. Please carefully read the “GENERAL SAFETY INFORMATION”

Failure to comply with instructions could result in personal injury or property damage.

Please explain to users how to operate and maintain the product after installation,

and this booklet should be presented to users.

Please retain this booklet for future reference.

Representative models:

FV-0511VQL1

FV-1115VQL1

FV-0511VQCL1

Ventilating Fan

FV-1115VQL1

FV-0511VQCL1

Model No.

FV-0511VQL1

Contents

GENERAL SAFETY INFORMATION

DESCRIPTION

UNPACKING

SUPPLIED ACCESSORIES

DIMENSIONS

WIRING DIAGRAM

SELECTOR INDICATION (FV-0511VQCL1 only)

OPERATION (FV-0511VQCL1 only)

FEATURE

INSTALLATION (NEW CONSTRUCTION)

INSTALLATION (RETROFIT)

MAINTENANCE (CLEANING)

PRACTICAL GUIDE TO INSTALLATION

SPECIFICATIONS

PRODUCT SERVICE

--------------2~3

----------------------------------------4

-----------------------------------------4

--------------------------4

-----------------------------------------5

-----------------------------------6

---------6

-----------------7

---------------------------------------------7

--------8~9

-----------------------10

------------------10~11

-----------11

-----------------------

------------ 11

--------------------

BACK COVER

1 1 Q C L 1 4 2 0 B

Summary of content (12 pages)

PAGE 1
INSTALLATION INSTRUCTIONS Ventilating Fan Model No.
PAGE 2
GENERAL SAFETY INFORMATION For Your Safety To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.
PAGE 3
GENERAL SAFETY INFORMATION CONTINUED Canada only: Not to be installed in a ceiling thermally insulated to a value greater than R40. Do not disassemble the unit for reconstruction. It may cause fire or electric shock. A statement to the effect that when the product is to no longer be used, it must not be left in place but remove, to prevent it from possibly failing. Ceiling joist must be subjected to static load more than five times the weight of the product.
PAGE 4
DESCRIPTION These products are listed by UL under UL file No. E78414. These products use a sirocco fan driven by a DC motor powered by an integral transformer. The motor is designed to have long operating life, high dynamic response, higher speed ranges with saving energy. The grille covering the fan body is a spring-loaded, quick remove type. A damper for preventing air counter flow is provided. The blower uses a high-capacity sirocco fan developed to reduce the noise level.
PAGE 5
DIMENSIONS FV-0511VQL1 , FV-1115VQL1 1 1/4 (30) 6 5 3 3 3/8 (86) 13 (330) 5 7/8 (148) 3 7/8 (100) 5 7/8 (151) 12 (304) 10 1/4 (260) 4 3 3/8 (86) 13 1/4 ~ 15 1/2 (336~394) 16 1/2 ~ 18 3/4 (419~480) 21 1/4 ~ 23 1/2 (540~597) 1 Unit: inches (mm) 1 1/2 (37) 4 1/2 (114) 6 5/8 (169) FV-1115VQL1 10 7 2 9 7 1/2 (190) FV-1115VQL1 13 (330) No. 1 8 10 1/4 (261) 3 7/8 (100) No.
PAGE 6
WIRING DIAGRAM FV-0511VQL1 , FV-1115VQL1 Fan body Main control circuit Junction box White Black Main control circuit DC Motor Neutral Live (Fan) (Ground wire) Green Ｂlue White Black LED AC120V 60Hz (Power supply) Live (N.
PAGE 7
OPERATION (FV-0511VQCL1 only) Panasonic ventilating fan responds to: (1) Motion sensor detectible condition. (2) Humidity sensor detectible condition. sensor Human activity Fan activity Stop The distance that motion can be detected is limited to 10 feet (3m). The field of view of the sensor is 90°. Room temperature is 25°C (77°F). OUTSIDE 90° INSIDE Motion sensor detectible condition The delay time is determined by timer preset switch. The unit continues running for an adjustable duration of 0.
PAGE 8
INSTALLATION (NEW CONSTRUCTION) The fan position between joists from 16" to 24" on center can be adjusted flexibly. CAUTION Adaptor Machine screw (M4X8) Please wear gloves during the installation work as follow. 1. Disconnect plug connector from receptacle (Fig.6) and remove adaptor from fan body by removing the machine screw (M4X8) before installation. (Fig.1) IMPORTANT: Remove the tape from damper and adaptor before installation. As shown below: Adaptor Fan body Fig.
PAGE 9
INSTALLATION (NEW CONSTRUCTION) CONTINUED 8. Insert fan body and slide into adapter assy with some strength, until the flange overlaps the Flex-Z Fast TM bracket. Secure the fan body to Flex-Z Fast TM bracket by using 2 self-drilling screws, plug connector to receptacle and secure the fan body to adaptor by using machine screw (M4X8). (Fig.6) CAUTION Secure machine screw (M4X8) to the suitable hole and not touch the Flex-Z Fast TM bracket. Please fix the screw carefully to avoid screw slip teeth.
PAGE 10
INSTALLATION (RETROFIT) WARNING 4. Secure the fan body to Flex-Z Fast TM bracket by using 2 self-drilling screws, plug connector to receptacle and secure the fan body to adaptor by using machine screw (M4X8). (Fig.12) CAUTION Secure machine screw (M4X8) to the suitable hole and not touch the Flex-Z Fast TM bracket. Please fix the screw carefully to avoid screw slip teeth. 5. Follow the step 10 to 13 on INSTALLATION (NEW CONSTRUCTION) 4Tapping screws(ST4.
PAGE 11
MAINTENANCE (CLEANING) CONTINUED 4. Using a cloth dampened with kitchen detergent, remove any dirt from fan body. Wipe dry with clean cloth. (Fig.15) 5. Reinstall grille. Ceiling WARNING Gloves Make sure the temperature of LED unit has cooled down before maintenance (cleaning) or replacement of lamp. Fig.15 PRACTICAL GUIDE TO INSTALLATION Properly insulate the area around the fan to 4 inches or 6 inches roof jack, wall cap, minimize building heat loss and gain. (Fig.
PAGE 12
PRODUCT SERVICE Warning Concerning Removal of Covers. The unit should be serviced by qualified technicians only. Your product is designed and manufactured to ensure a minimum of maintenance. Should your unit require service or parts, call Panasonic Call Center at 1-866-292-7299 (USA) or 1-800-669-5165 (Canada). Panasonic Corporation of North America Panasonic Canada Inc. Two Riverfront Plaza, Newark, NJ 07102 www.panasonic.com 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www.panasonic.