Owner's manual

GENERAL SAFETY INFORMATION CONTINUED
Awarning
0 Do not use this fan with any solid-state speed control device.
Canada only: Not to be installed in a ceiling thermally insulated to a value greater than R40.
0
Do not disassemble the unit for reconstruction.
O
A statement to the effect that when the product is to no longer be used, it must not be left in
place but removed, to prevent it from possibly falling.
Ceiling joist must be subjected to static load more than five times the weight of the product.
0 Do not install with a method which is not approved in the instrucions.
This product must be properly grounded.
o
o
o
o
o
o
o
o
0
0
o
Acaution
Do not install this ventilating fan where interior room temperature may
exceed 104°F(40°C).
Make sure that the electric service supply voltage is AC 120V, 60 Hz.
Follow all local electrical and safety codes, as well as the National
Electrical Code (NEC) and the Occupation Safety and Health Act (OSHA).
Always disconnect the power source before working on or near the fan, prohibited
motor, light fixture or junction box.
Protect the supply wiring from sharp edges, oil, grease, hot surfaces,
chemicals or other objects.
Q ^
Prohibited
Gw
’rohibrted
0QZ=D
Prohibited
Do not kink the supply wiring.
Provide make up air for proper ventilation.
For general ventilating use only. Do not use to exhaust hazardous or
explosive materials and vapors.
0
Prohibited
Fig. A
Adaptor
/
Do not install the unit where ducts are configured as shown
in Fig.A.
Not for use in cooking area. (Fig.B)
The special-purpose or dedicated parts, such as mounting
fixtures, must be used if such parts are provided.
n-4-
(Cooking area)
Do not install above or
inside this area
/
/
\
/
Cooking
equipment
Fig.B
jL
Floor