Manual

MAINTENANCE CLEANINGI ()MAINTENANCE CLEANINGI ()

Disconnect power source before working on unit. Routine

maintenance must be done every year.

WARNING:

CAUTION:

1. Never use petrol, benzene, thinner or any other such

chemicals for cleaning the ventilating fan.

2. Do not damp water to enter motor.

3. Do not soak resin parts in water over 60 C.

1. Remove grille. (Squeeze mounting spring and pull down

carefully.) (Fig.22)

2. Wash and clean grille. (Use non-abrasive kitchen detergent,

wipe dry with new cloth.) (Fig.23)

Fig. 23

3. Remove dust and dirt from fan body using a vacuum

cleaner. (Remove lamps if necessary.) (Fig.24)

4. Using a cloth dampened with kitchen detergent, remove

any dirt from fan body. Wipe dry with new cloth. (Fig.25)

5. Replace lamps and grille.

MAINTENANCE II (REPLACEMENT OF LAMP)MAINTENANCE II (REPLACEMENT OF LAMP)

1. Disconnect power source before working on unit.

2. The lamp's glass is fragile. Please handle with care. To remove lamp, grasp at base and move back

and force to loosen. Do not pull hard on the lamp or you may break the glass.

3. 4W night lamp has threaded base. Remove by turning counterclockwise.

Fig.24

Vacuum cleaner

Fig.25

Fig. 22

Slot

Mounting

spring

Grille

Gloves