Installation Guide

English
DESCRIPTION
These products are listed by UL under UL file No. E78414.
These products use a sirocco fan driven by a DC motor powered by an integral transformer. The motor is
designed to have long operating life, high dynamic response, higher speed ranges with saving energy.
The grille covering the fan body is a spring-loaded, quick remove type. A damper for preventing air counter
flow is provided. The blower uses a high-capacity sirocco fan developed to reduce the noise level.
SUPPLIED ACCESSORIES
UNPACKING
Unpack and carefully remove the unit from carton.
Refer to the Supplied Accessories list to verify that all parts are present.
1
1
1
Installation
instructions
Self-drilling
screw
Warranty
sheet
Part name Part nameAppearance Quantity
Grille
4
TM
Flex-Z Fast
bracket
(with 4
tapping screws
-ST4.2X20)
1
Appearance Quantity
(FV-0511VQC1 only)
This Panasonic ventilating fan model is equipped with a motion sensor and a humidity sensor that turn
on automatically when motion is detected, when humidity increases rapidly, or when humidity rises above
a 30% ~ 80% relative humidity set-point. It is user-adjustable to operate 0.5 ~ 60 minutes after the sensors
are no longer detected.
GENERAL SAFETY INFORMATION CONTINUED
Provide make up air for proper ventilation.
Do not install the unit where ducts are configured as shown in below.
When one switch is connected with two or more products in parallel, the unit may not function.
Therefore, parallel connection should not be allowed.
Bend close to duct adaptor
Squeezed ductSuccessive bendingExcessive bending
Adaptor
4
NOTICE