Installation Manual

ManualsBrandsPanasonic ManualsMisc ElectronicsPanasonic FV-40NLF1

INSTALLATION INSTRUCTIONS

In-Line Fan

Model No.

FV-10NLF1E FV-20NLF1 FV-30NLF1 FV-40NLF1

FV-10NLF1E

FV-20NLF1

FV-30NLF1

FV-40NLF1

READ AND SAVE THESE INSTRUCTIONS

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before attempting to install, operate or service the

Panasonic product. Failure to comply with instructions could result in personal injury or

property damage. Please explain to users how to operate and maintain the product after

installation, and this booklet should be presented to users.

Please retain this booklet for future reference.

Contents

GENERAL SAFETY INFORMATION ....................................2

DESCRIPTION ......................................................................... 4

UNPACKING ........................................................................... 4

SUPPLIED ACCESSORIES ........................................................ 4

DIMENSIONS .......................................................................... 5

INSTALLATION I (HORIZONTALLY BETWEEN JOISTS) ...... 5

INSTALLATION II (ON CEILINGS/JOISTS) .............................. 7

INSTALLATION III (VERTICALLY ON JOISTS OR PILLARS) .... 8

MAINTENANCE ...................................................................... 9

PRACTICAL GUIDE TO INSTALLATION .................................. 9

SPECIFICATIONS................................................................... 10

PRODUCT SERVICE .............................................................. 10

Summary of content (10 pages)

PAGE 1
INSTALLATION INSTRUCTIONS In-Line Fan Model No. FV-10NLF1E FV-20NLF1 FV-30NLF1 FV-40NLF1 Contents GENERAL SAFETY INFORMATION.....................................2~3 DESCRIPTION.......................................................................... 4 UNPACKING............................................................................ 4 SUPPLIED ACCESSORIES......................................................... 4 DIMENSIONS...........................................................................
PAGE 2
GENERAL SAFETY INFORMATION For Your Safety To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.
PAGE 3
GENERAL SAFETY INFORMATION WARNING Not to be installed in a ceiling thermally insulated to a value greater than R40. (This is required for installation in Canada only.) Never place a switch where it can be reached from a tub or shower. A statement to the effect that when the product is to no longer be used, it must not be left in place but removed, to prevent it from possibly falling. Do not disassemble the unit for reconstruction. It may cause fire or electric shock.
PAGE 4
DESCRIPTION These Panasonic In-Line Fan models use a sirocco fan driven by a capacitor motor. The motor is designed to have an extended service life with reduced energy consumption, and a reduced noise level. It also incorporates a thermal cutout for safety. UNPACKING Unpack and carefully remove unit from carton. Refer to the supplied accessories list to verify that all parts are present.
PAGE 5
DIMENSIONS C A H D B J I AIR FLOW E No. F G Part name No. Part name  Motor  Inspection panel  Body  Bracket cover  Adapter  Installation bracket  Fan Extension bracket  Junction box  Bracket  Junction box cover  Holder Dimensions: mm(inch) Model No. A B C D E F G H FV-10NLF1E 340 (13 3/8) 240 (9 7/16) 440 (17 5/16) 200 (7 7/8) 38.
PAGE 6
INSTALLATION I (HORIZONTALLY BETWEEN JOISTS) 3. After confirming the direction that the unit will be facing, attach the bracket and bracket cover to the unit with self-tapping screws. (Fig.2) CAUTION Bracket cover Bracket The holder was assembled on the back side of the unit. (no shown in Fig.2) Attach the unit body horizontally to the panel of your choice. For best results, the bracket and bracket cover should be attached vertically.
PAGE 7
INSTALLATION I (HORIZONTALLY BETWEEN JOISTS) Wiring Diagram Fan body Motor 10. Install circular ducts (on both ends) and secure them with tape or clamps. Consult table 3 for the appropriate duct sizes. Junction box Blue Red White Capacitor Power Supply 120V ~ 60Hz Black (Fuse in Motor FV-10NLF1E:134°C FV-20NLF1:167°C FV-30NLF1:134°C FV-40NLF1:134°C) Thermally - protected Green MODEL FV-10NLF1E FV-20NLF1 FV-30NLF1 FV-40NLF1 102 (4) duct ∅ 152 (6) 152 (6) 203 (8) (table 3) 11.
PAGE 8
INSTALLATION III (VERTICALLY ON JOISTS OR PILLARS) Installing the In-Line Fan requires an accessible area (attic or air extraction apparatus) 1. Install the In-Line Fan using the first step described in INSTALLATION II. 2. Extend installation bracket and hang the unit on the joist or piller. Fix with the long screws. (Fig.8) Installation bracket Fig.6 Bracket CAUTION Be careful not to drop the unit. 3. Remove junction box cover and secure conduit or wire holder to junction box cover knockout hole. (Fig.
PAGE 9
MAINTENANCE WARNING Disconnect power line before proceeding with repairs or maintenance. CAUTION Never use benzene based thinner or similar chemicals for cleaning the In-Line Fan. Do not allow water to come into contact with the motor. Inspection panal Do not immerse resin parts in water where the temperature is over 60℃ (140°F). Fig.9 1. Remove inspection panel (take off the screws and pull). (Fig.9) 2. Clean inspection panel (do not immerse in water), wipe dry with cloth. 3.
PAGE 10
SPECIFICATIONS Model No. Air direction V Hz Power consumption (W) Speed (PRM) Air delivery (CFM) Weight Kg (lb.) 30 1510 120 6.3(13.9) 57 1260 240 7.5(16.5) 98 1340 340 10.9(24.1) 132 1150 440 11.9(26.3) FV-10NLF1E FV-20NLF1 FV-30NLF1 Exhaust 120 60 FV-40NLF1 *Power consumption, speed and air delivery values have been measured at 5mm WG (0.2’’ WG). PRODUCT SERVICE Warning Concerning Removal of Covers. The unit should be serviced by qualified technicians only.