User's Manual
Table Of Contents
- Personal ComputerModel No. FZ-55 SeriesOperating Instructions - Reference Manual
- Introduction
- Attaching/Detaching the keyboard
- Rear Expansion Area
- Front Expansion Area
- TOUGHBOOK Universal Bay
- Create a Recovery Disc
- About the Partition Structure
- Flash Memory Backup/Restore Function
- Description of Parts
- Turning On / Turning Off
- Touchpad
- Keyboard
- Screen Input Operation
- Important Tips
- Battery Power
- Sleep/Hibernation Functions
- Panasonic PC Settings Utility
- LAN
- Disabling/Enabling Wireless Communication
- Wireless LAN
- Bluetooth
- Wireless WAN
- GPS
- Saving Power
- Security Measures
- Concealed Mode
- Panasonic PC Day Night Mode Utility
- Setup Utility
- Handling and Maintenance
- Optical Disc Drive
- microSD Memory Card
- Smart Card
- RAM Module
- External Display
- USB Devices
- Serial Port
- Camera
- Contactless Smart Card Reader/RFID Reader
- Fingerprint Reader
- Discreted GPU
- SSD Pack
- Flash Memory Drive
- Port Replicator (CF-VEB541 series)
- Battery Charger
- Troubleshooting
- Hardware Diagnostics
- Reset your computer
- Installing Software
- Error Message
- Technical Information
- Erasing Flash Memory Data
- Specifications
- WARRANTY
USB Devices
Features of the Supported Standards
USB 3.1 (Type-A) port
Support USB 1.1, 2.0, 3.0 and 3.1 Gen 1.
USB 3.1 (Type-C) port
The features of the supported standards are as follows.
USB 3.1 (Gen 1)
USB Power Delivery <only for model that supports power delivery> ( USB Power Delivery)
Connecting/Removing USB Devices
To connect the USB device
Right side
1. Open the cover (A) and connect the USB device to the USB 3.1 (Type-A) port (B) or the USB 3.1 (Type-C) port (C) on the computer.
Rear side
1. Open the cover (D) and connect the USB device to the USB 3.1 (Type-A) port (E) on the computer.
To check whether the connected device supports USB 3.1 Type-C, refer to the operating instructions supplied with the device.
To remove the USB device
1. Disable the USB device.
1.
Click on the tasktray and click .
2. Select the USB device.
These steps are not necessary when;
Removing the device after turning off the computer.
is not displayed.
The device does not appear in the list in step 2.
2. Remove the USB device.
N O T E